2018 General Implement Lorenz Springtine Cultivator Non-Folding

2018 General Implement Lorenz Springtine Cultivator Non-Folding

Non-folding models are made with heavy-wall 5" x 7" toolbar for 2-Row wide, 4-Row wide, 6-Row narrow, 6-Row wide, 8-Row narrow, and 8-Row wide cultivation. Specialty Skip-Row models are also available.

Take a close look at the way a Lorenz vibra spring cultivator is built. You'll enjoy thousands of acres of clean, high-speed cultivating. And a Lorenz will penetrate the hardest ground you can pull it through. Our extra-long gangs assure outstanding trash clearance. The Lorenz vibra-spring tine vibrates in a circular motion as it passes trough the field, literally exploding the soil. Weeds are blasted out and left on the surface to die. The vibrating tines will not roll up slabs.

A Lorenz vibra spring cultivator reduces soil erosion and makes harvesting easier because the field is leveled during cultivation.

Features may include:

• Lorenz uses three tubular steel linkage arms on each cultivator gang. This minimizes any sway or fish-tailing of the gangs. The welded steel bushing in the end of the arms has a wear resistant nylon bushing inside which eliminated greasing. Notice that our link arms are all double nutted to prevent loosening.

• Our extra long gangs allow high speed cultivation with 4 ranks of tines for exceptional trash clearance. Flaged angle irons frip the toolbar like a wrench, eliminating twisting of gangs.

• Ever spend hours walking thru the field looking for a lost springtine and shovel? Our flanged gang tubes and bullnose tine clamp help eliminated these losses.

• Stabilizer guide coulters can be mounted on the ends of the cultivator or on the center of the unit. Gauge wheels are easy to adjust to maintain uniform depth. Front gang tubes slide by one another to adjust to your row spacing needs

• This hinge design allows the cultivator wings to fold down 180° abd rest ib oads when the 16" cylinders are fully retracted. The flat-fold desing makes the cultivator easier to transport and shed.

• A gauge wheel kit can be put on the cultivator to assist tractor hydraulics in keeping the tool-bar parralel to the ground. (This kit is recommended for larger 8 & 12 row units.)