TexStar Equipment Sales

  • 5446 N State Hwy 6
  • Waco, TX 76712
  • Call Us: (254) 313-9970
  • https://www.texstarequipment.com/
Print This Page

2025 Vermeer® Bale Processor BPX9010

Information

2025 Vermeer® Bale Processor BPX9010

No one likes spending their time cleaning netwrap and twine off the rotor. That’s why the rotor cleaner attachment is designed to reduce excessive net and twine on the rotor and to minimize the amount that ends up in the feed.

Load bales conveniently and reduce machine stress with the vertical bale lift system. The robust T-style tongue frame, free of welds at high-stress points, adds durability by being bolted high on the tub.

Feed the bale consistently into the rotor with the slat and chain bale rotation design – reducing the need for reverse rotation.

Consistent feeding comes standard, thanks to an offset rotor that pulls the material through the machine and helps prevent uncontrolled fall-through when slowing down.

Spread bedding with consistency at ranges of up to 50 ft (15.2 m).

Gain control during operation with the toolless cut control bar design, featuring ten settings to customize your processing speed and material size.

Features may include:

  • Torque Protection - Driveline: Shear bolt
  • Simplicity, durability and versatility
  • An all-around processor ready to perform a variety of applications
  • Waste less, process more

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Bale Processor BPX9010
  • Available
  • 8.5 ft

Specifications

  • 2025
  • Vermeer®
  • Bale Processor
  • BPX9010
  • Round Baler
  • Recommended: 100 hp
  • 85 hp (63 kW)
  • 210 hp
  • 1000 rpm
  • Torque Protection: Shear bolt
  • Flail Drum: 1000 rpm
  • 2000 psi
  • 3 double-acting
  • Rate: 8 gpm
  • Axle adjustment: 12 in (30.5 cm) each axle | Bale rotation: 3 roller chains with bolt-on cross slat | Cut Control Bar Quantity: 7 | Flail: 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring | Flail Drum Diameter: 26.8 in | Horizontal spread distance: Up to 50 ft (15.2 m)
  • 8.5 ft
  • 8.2 ft
  • 11.2 ft
  • 15.8 ft | Flail Drum: 78 in
  • Size: (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m)
  • 5240 lbs | Drawbar: 1480 lbs | Bale capacity: 2500 lbs
  • Cut Control Bar Adjustment: Hand lever with 5 settings | Discharge Direction: Right hand
  • Drum: 30