2025 Vermeer® Round Hay Balers 504 Pro G4

Information

2025 Vermeer® Round Hay Balers 504 Pro G4

Spend more time baling hay and less time clearing out your pickup. The unique geometry of the patent-pending poly riser stripper bands promote crop stripping and minimize pickup wrapping.

Built with few moving parts, the camless wide pickup gets the job done and helps minimize parts cost when it’s time for routine maintenance.

The drop floor flexes during baling to help crop flow into the chamber with ease. If a plug does occur, operators can clear the plug from the cab so they can get back to baling.

Choose your preferred cut length for optimizing bale density, silage quality, feed mixing time and digestibility with a 17-knife chopping system.

Load and route netwrap with ease at the back of the baler with a rear-load netwrap system. Spread net edge-to-edge and adjust netwrap tension from the cab on a scale of 0 to 100 to maximize spread over the edges depending on the type of netwrap.

Baling tough crops? No problem. A 540 rpm or 1,000 rpm PTO tie into a split gearbox, running the pickup on one side and the chamber on the other to help spread the load to both sides of the baler.

Tired of replacing pickup teeth? No problem. Rubber-mounted pickup teeth are more durable and last longer than standard pickup teeth.

The drop floor flexes during baling to help crop flow into the chamber with ease. If a plug does occur, operators can clear the plug from the cab so they can get back to baling.

Operators can rest assured with a 3-year pickup coverage on internal components including parts* and labor. *Does not include teeth or hardware for teeth.

Monitor real-time bale and crop statistics and adjust based on moisture, crop and customer preference for up to 50 fields. Plus, control features like the knife banks, drop floor and net tension, all without ever leaving the seat.

Features may include:

  • Stay in the field when it matters most
  • Bale nutrient-dense silage or dry hay
  • Engineered with versatility, durability and ease of use in mind

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Round Hay Balers 504 Pro G4
  • Available
  • Bale: 48 in | Belt: 11.2 in | Tooth to tooth: 73 in | On outside flair: 78 in
  • 120 in

Specifications

  • 2025
  • Vermeer®
  • Round Hay Balers
  • 504 Pro G4
  • Round Balers
  • 80 hp
  • Recommended: 110 hp
  • 540 rpm, cut-out clutch
  • 21.5L-16.1 flotation tire
  • Drive Roller Size: 7.1-in (18-cm) rubber and (1) 6.6-in (17-cm) steel | Drum roller size: 9.5 in | Idler roller size: 6.6 in, 4.5 in (17 cm, 11 cm) | Start Roller Size: 8 in | Roller chains: Single 60, 80, 100 and double 80 | Tooth Bars: 5 | Number of Teeth: (75) double rubber-mounted | Teeth spacing: 2.5 in (6.4 cm) | Flotation: Gauge wheels 7.10-16 HD semi-pneumatic with spring assist | Display: 7-in (18-cm) color touch screen | Field Statistics: 50 fields with names
  • 120 in
  • 36 in - 60 in (91 cm - 150 cm)
  • With Net: 205 in | With ramp: 205 in | Belt: 433 in
  • Bale: 48 in | Belt: 11.2 in | Tooth to tooth: 73 in | On outside flair: 78 in
  • Maximum bale: 2400 lbs | Fully optioned: 10250 lbs
  • Type of Lace: No laces | Torque protection pickup: Radial pin clutch | Bearing and Sprocket Configuration: Round and hex drive shafts, greaseable roller bearings | Pickup type: Camless wide | Stripper bands: Poly | Pickup Lift: Hydraulic | Control system type: Atlas Pro™ control system | Field statistics download: USB | Density readings: Digital gauge | Net tension control: via control system | Bale ramp: Spring-loaded
  • 4
  • Endless belts
  • 3-year pickup