2024 Vermeer® BC1500 PSI
- Year 2024
- Make Vermeer®
- Model BC1500
2024 Vermeer® BC1500 PSI
2024 Vermeer® BC1500 PSI
The Vermeer BC1500 brush chipper uses a precision-balanced 22.5-in (57.2-cm) drum with two 5-in x 8-in (12.7-cm x 20.3-cm) A8 double-sided knives to chip through material up to 15 in (38.1 cm). Powered by a Tier 4 Final Cummins diesel engine and a PSI 5.7L gas engine, the BC1500 can handle the toughest of material with ease.
Features may include:
SmartFeed systemImprove productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.
Vertical feed rollersReduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
Engine
Engine Manufacturer
PSI | Option One: Dexter
Displacement
5.7L
Cylinder Liners
8
Engine Power
Gross: 165 hp
Engine Torque, Maximum
300 ft-lb
Air Cleaner
2-stage dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Motor
Displacement
Motor: 28.3 cu in (468.8 cu cm)
Motor Type
Manufacturer: White
Fuel System
Fuel Type
Gasoline
Fuel System
Max Consumption: 11.7 gph
Drivetrain
Clutch
13" spring loaded clutch | Drive Engagement: Manual lever
Suspension
Suspension
Torsion
Wheels & Tires
Tires, Rear Specification
LT 285/75R16 LR E
Brakes
Brake System Type
Electric
Battery
Battery
950
Electric
Electrical
System Voltage: 12 | Switches: Droop sensitivity, exhaust aftertreatment enable/disable and EcoIdle toggle switches | Display: Multifunction Display (MFD) | Shutdown System: High coolant temp, low oil pressure
Alternator
70 Amp
Operational
Operating Speed
Feed: 122 ft/min | drum: 2208 RPM
Operating Conditions
Actuation Force (BFSB): 34 lbs
Performance
Noise Level
125
Hydraulics
Hydraulic Type
System Type: Open center
Hydraulic Pump
Pump Flow at Maximum RPM: 5.5 gpm
Maximum Pressure
System relief: 2800 psi | Auto Reverse: 2650 psi
Airflow
4600 cfm
Chassis
Chassis
Tongue Description: 2.5" x 4.5" x .375" (6.4 cm x 11.4 cm x 1 cm) / Extension: Ext. 18" (45.2 cm) | Fender Description: Bolt-on
Frame Type
.25" (6 mm) Z channel, 7" (17.8 cm)
Hitch/Type
Pintle
Lights and Safety
Safety Features
Lock - Number of Positions: 2 | Rotational Lock: Self-locking gear set plus an additional steel plate rotation lock
Lights and Safety
Lighting
Trailer Type: led
Dimensions
Dimensions
Feed Roller Minimum Distance to Drum: 1.3 in | Feed Roller Dimension: 20.9" (53.1 cm) diameter | Infeed Throat Capacity: 15" x 20" (38.1 cm x 50.8 cm) | Pinch Point - Distance to End of Feed Table: 67.4 in | Distance from Feed Table to Ground: 27.2 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 15 in | Thickness: .4 in | drum Diameter: 22.5 in | Knife Thickness: .6 in | Knife Size: .625" x 5" x 8" (1.6 cm x 12.7 cm x 20.3 cm) | Bedknife Size: 2.5" (6.4 cm) | Bedknife Thickness: 1.5 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Maximum Angle of Continuous Operation: 20 deg
Length
Feed Table Up, Tongue In: 179 in | Table Down, Tongue Extended: 217 in | Infeed Table: 30.1 in
Width
86 in | Infeed Table: 55.4 in | drum: 22 in
Height
104 in | Infeed Hopper: 32 in | Chute: 104 in
Fan Diameter
18.7 suction
Wheels
Wheels - Option One: 16" (40.6 cm)
Capacities
Fuel Capacity
Tank: 50 gal
Oil capacity
Oil Volume with Filter: 5 qt
Cooling System
Coolant Capacity (Engine and Radiator): 5 gal
Load Capacity, Land
Feed Roller Clamp: 300 lbs
Features
Option One: 8000 lb (3628.7 kg)
Hydraulic Capacity
Tank: 12 gal
Weights
Weight
Option One: 7800 lbs | Tongue - Engine Option One: 940 lbs | Of Feed Roller: 120 lbs | With Shaft: 540 lbs
Features
Features
Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Reset Method: Green Hold-to-Run button | Positions: 4: E-stop, forward, neutral, reverse | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 2 | Rotation Type: Manual worm gear drive | Filtration Method: 3 micron return, 100 micron suction | Controller: Vermeer ACS | Type - Option One: Rubber torsional
Oil Type
Recommended: API | hydraulic: Recommended: Vermeer VMF
Construction Material
A8 chipper steel | Bedknife: HRLC steel
Knife Quantity
12 | Number of Knives: 2 | Number of Bolts/Knife: 3