2024 Vermeer® BC1800XL Tier 4 Final Cummins

Information

2024 Vermeer® BC1800XL Tier 4 Final Cummins

When the jobsite calls for large-diameter chipping, look to the Vermeer BC1800XL brush chipper. Built with strength for demanding conditions, the BC1800XL possesses the power and features needed for land-clearing and tree care operations.

The BC1800XL is now available with a John Deere Tier 4 Final engine with 173 hp (129 kW). Other standard features include the patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.

Features may include:

Vertical feed rollers

Reduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.

Improved operator safety

Provides operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.

Tree Commander remote control

With the standard Tree Commander remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC1800XL Tier 4 Final Cummins
  • QSF
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • Diesel
  • Available
  • 78.5 in | Infeed Table: 67 in | drum: .5 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in

Specifications

  • 2024
  • Vermeer®
  • BC1800XL Tier 4 Final
  • Cummins
  • Brush
  • QSF
  • Cummins | Option One: Dexter
  • 28.4
  • 4
  • Gross (Maximum): 130 hp
  • 360 ft-lb
  • Medium: Liquid
  • Manufacturer: White RE470
  • Diesel
  • Torflex
  • Option One: 235/75R17.5 load range H
  • Electric
  • 950 cca
  • System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Controller: Vermeer ACS: CB02 | Shutdown System: High temp, low pressure
  • Feed: 117 ft/min | drum: 1100
  • Rope Line Pull: 2000 lbs
  • 3544 cfm
  • System Type: Open Center
  • Pump Flow at Maximum RPM: 6.3 gpm
  • System relief: 2800 psi | Auto Reverse: 2400 psi | Winch Relief System: 3000 psi
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • 7" x 2.13" Channel
  • Pintle
  • Trailer Light Type: LED | Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
  • Feed Roller Dimension: 23.5" x 18 | Feed Roller Dimension (Two): 23.5" x 18 | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | diameter: 2 in | Material Thickness: 11 in | Material Capacity: 19 in | Thickness: 26.1 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .3 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Choker: 1/4"
  • Feed Table Up, Tongue In: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in | Rope: 150 ft
  • 78.5 in | Infeed Table: 67 in | drum: .5 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in
  • Option One 17.5" x 6.75" BC of 8 on 6.5"
  • Feed Roller Clamp Load: 380 lbs
  • Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | | Switches: Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity | Controller: Vermeer ACS: CB02 | Display: MFD | Shutdown System High temp, low pressure, | Radio Remote Control: Tree Commander | Type - Option One: Rubber Torsional | Winch Controls: Forward, Reverse, Free Spool
  • Without winch and hydraulic jack: 9600 lbs | with winch, hydraulic jack and hydraulic chute: 10366 lbs | of Feed Roller: 116 lbs | With Shaft: 1160 lbs
  • Recommended hydraulic: Vermeer VMF
  • A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom Structure: 0.25 GR50
  • 11 / (2): 11 | 4 | Number of Bolts/Knife: 5