2024 Vermeer® BC1800XL 1800XL

Information

2024 Vermeer® BC1800XL 1800XL

Whether you are a municipality or a tree service company and working on a jobsite which calls for large-diameter chipping, look to the Vermeer BC1800XL gas brush chipper. Built with strength for demanding conditions, it has the power needed for land-clearing and tree care operations. The BC1800XL gas brush chipper is equipped with features such as patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.

Features may include:

Vertical feed rollers

Reduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.

Improved operator safety

Improved operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.

Tree Commander™ remote control

With the standard Tree Commander™ remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC1800XL 1800XL
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • Gas
  • Available
  • 78.5 in | Infeed Table: 67 in | drum: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in

Specifications

  • 2024
  • Vermeer®
  • BC1800XL
  • 1800XL
  • Brush
  • Origin | Linkbelt | Option One: Dexter
  • 28.4
  • 8
  • Gross (Maximum): 172 hp
  • 322 ft-lb
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • 2.9 in
  • Manufacturer: White RE470
  • Max Fuel Consumption: 11.7 gph
  • Gas
  • 13" Spring Loaded Clutch | Drive Engagement: Manual Lever
  • Torflex
  • Option One: 235/75R17.5 load range H
  • Electric
  • 950 cca
  • System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Shutdown System: High temp, low pressure | Radio Remote Control: Tree Commander
  • 70
  • Feed: 117 ft/min | drum: 1100
  • 124
  • System Type: open Center
  • Pump Flow at Maximum RPM: 6.3 gpm
  • System relief: 2850 psi | Auto Reverse: 2650 psi | Winch Relief System: 3000 psi
  • 3544 cfm
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • 7" x 2.13" Channel
  • Pintle
  • LED | Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
  • Maximum Angle of Continuous Operation: 20 deg | Feed Roller Dimension: 23.5" x 18" | Feed Roller Dimension (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg / Reduced: 12 deg | Diameter: 2 in | Material Thickness: 11 in | Material Capacity: 19 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Line Pull: 2000 lbs | Rope Choker: 1/4"
  • Feed Table Up, Tongue In: 177 in | table Down, Tongue Extended: 231 in | Infeed Table: 36 in | Rope: 150 ft
  • 78.5 in | Infeed Table: 67 in | drum: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in
  • 18.7
  • Option One: 17.5" x 6.75" BC of 8 on 6.5"
  • Tank: 50 gal
  • Volume with Filter: 5 qt
  • Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Fender Description: Integrated | Trailer Light Type: LED | Cutter Drive: Spherical roller | Belt Idler/Tensioner: Spring loaded | Controller Vermeer: ACS: CB02 | Display: MFD | Shutdown System: High temp, low pressure, | Radio Remote Control: Tree Commander | Type - Option One: Rubber Torsional | Winch Controls: Forward, Reverse, Free Spool
  • Coolant Capacity (Engine and Radiator): 5 gal
  • Feed Roller Clamp Load: 380 lbs
  • Tank: 12 gal
  • Without winch and hydraulic jack: 8800 lbs | with winch, hydraulic jack and hydraulic chute: 9300 lbs | of Feed Roller: 116 lbs | With Shaft: 1160 lbs
  • Recommended: API | hydraulic Recommended: Vermeer VMF
  • A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom: Structure 0.25 GR50
  • (2): 11 | 4 | Number of Bolts/Knife: 5