2024 Vermeer® BC700XL 700XL

Information

2024 Vermeer® BC700XL 700XL

Vermeer continues to respond to the demands of the rental, landscape and tree care professionals with the BC700XL brush chipper. The smallest machine in the Vermeer brush chipper line, the BC700XL design is based on operator feedback and focuses on productivity advantage and ease of use. The brush chipper features a centrifugal clutch system, 25 hp (18.6 kW) Kohler EFI engine, bottom feed stop bar and Vermeer-exclusive SmartFeed feed-sensing control system. The new member of the chippers line offers the compact size operators are looking for and the performance they want to achieve a job efficiently.

Features may include:

Centrifugal clutch engagement

The centrifugal clutch engagement prevents belt slippage when engaging the clutch which means fewer maintenance costs.

25 hp (18.6 kW) electronic fuel-injected (EFI) Kohler engine

The 25 hp (18.6 kW) electronic fuel-injected (EFI) Kohler engine performs well during cold-weather starts, has reduced occurrence of engine flooding and provides improved fuel economy over comparable carbureted gas engines.

Large infeed opening

The large infeed opening makes feeding irregular material easier and decreases the amount of saw cuts needed prior to feeding the chipper.

SmartFeed system

The exclusive SmartFeed, patented feed-sensing control system from Vermeer helps increase operator productivity and reduces strain on vital engine parts, as engine rpm is monitored and feed rollers are controlled.

Bottom feed stop bar

A bottom feed stop bar is strategically located to make it possible for the operator's leg to strike the bar and shut off the feed mechanism either intentionally or automatically in an emergency situation.

Wide axle

The wide axle offers a wide footprint at the axle for side-to-side stability; additionally enhances transportability and visibility while backing up.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC700XL 700XL
  • Gasoline
  • Available
  • 71 in | Infeed Table: 41.2 in | 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in

Specifications

  • 2024
  • Vermeer®
  • BC700XL
  • 700XL
  • Brush
  • Kohler | Linkbelt | Option One: Dexter | Option Two: Dexter
  • ECH740 | Flange-mounted ball type, self-aligning
  • Gross Horsepower (Maximum): 25 hp
  • 41.7 ft-lb
  • Kohler HD 2-Stage Dry
  • Medium: Oil/Air
  • 5000 cfm
  • 1.5 in
  • 14
  • Manufacturer: White Hydraulics
  • Max Consumption: 2.4 gph
  • Gasoline
  • Type: Centrifugal PTO | Drive Engagement: Centrifugal
  • 2000 lb/(907.2 kg) rubber torsion axle | Option Two: 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • Option One: ST185/80D13 load range D
  • Option One: 13 x 5, bolt circle 5 on 4.5
  • Group 26, 400 CCA
  • 20A Charging
  • System Voltage: 12 Volt
  • Feed: 49.4 ft/min | 1748
  • Spin-on
  • System Type: Open center
  • Pump Flow at Maximum RPM: 3.8 gpm
  • System relief pressure: 2500 psi
  • 3/16"/(.5 cm) ASTM A1011 steel
  • 2"/(5.1 cm) ball coupler | Option One: Rubber Torsional | Option Two: Rubber torsional, braked
  • Trailer Type: LED
  • Maximum Angle of Continuous Operation: 25 deg | Feed Roller Minimum Distance to Drum: 4 in | Feed Roller Dimension: 10" Diameter | Infeed Throat Capacity: 6" x 8" (15.24 cm x 20.32 cm) | Pinch Point - Distance to End of Feed Table: 65.4 in | Distance from Feed Table to Ground: 28.1 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 12" (30.48 cm) | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 6 in | Thickness: 1.3 in | Diameter: 23.9 in | Knife Thickness: .6 in | Bedknife Size: 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 240 deg | Fender Description: .1"/(.3 cm) Steel bolt-on
  • Feed Table Up, Tongue In: 115 in | Table Down, Tongue Extended: 136 in | Infeed Table: 30.2 in
  • 71 in | Infeed Table: 41.2 in | 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in
  • Tank: 6 gal
  • Volume with Filter: 2 qt
  • Feed Roller Clamp Load: 525 lbs
  • Feed Roller Orientation: Horizontal | Feed Roller Clamp Type: Spring/Feed Roller Weight | Reset Method: Dual green hold-to-run buttons | Positions: Four position: (E-Stop), Forward, Stop, (Reverse) | Fixture Method: Welded | Belt Idler/Tensioner: Spring-loaded adjustable Idler | Rotation Type: Manual | Rotational Lock: Standard Latch | Filtration Method: Return flow filtration, 10 micron
  • 6.8 gal
  • Of Feed Roller: 100 lbs | With Shaft: 176 lbs
  • Recommended: Kohler oil or API CH4/SJ | Vermeer VMF Gold
  • A8 Chipper Steel | Bedknife: ASTM A572 Grade 50
  • 2-band 5-V profile Aramid