2024 Vermeer® BC900XL 900XL

Information

2024 Vermeer® BC900XL 900XL

Able to chip heavily branched material up to 9 in (22.9 cm) in diameter and 14 in (35.6 cm) wide, the BC900XL is ideal for line clearing and general cleanup needs. In combination, the Vermeer-exclusive SmartFeed system, and its 35 hp (26.1 kW) Briggs and Stratton gas engine, pulls in and processes difficult material.

Features may include:

SmartFeed system

Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.

Bottom feed stop bar

Provides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward / reverse feed positions mounts over the feed table and enables the operator to stop the feed rollers and select forward or reverse operations.

1-year/1,000-hour limited warranty

Protect your investment with a 1-year/1,000-hour limited warranty.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC900XL 900XL
  • Tongue Description: 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
  • Gasoline
  • Available
  • 79.5 in | Infeed Table: 48 in
  • 97 in | Infeed Hopper: 32 in | Chute: 96.7 in

Specifications

  • 2024
  • Vermeer®
  • BC900XL
  • 900XL
  • Brush
  • Briggs and Stratton Vanguard | Linkbelt | Option One: Dexter | Option Two: Dexter
  • Gross Horsepower (Maximum): 35 hp
  • 53 ft-lb
  • Engine-mounted
  • Medium: Air
  • 3925 cfm
  • 2.2 in
  • Spin-On
  • 33.1 CID
  • Manufacturer: White
  • Max Fuel Consumption: 3.2 gph
  • Gasoline
  • Drive Engagement: Clutchless PTO
  • 3500 lb (1587.6 kg) | Option Two: 3500 lb (1587.6 kg) with electric brakes
  • Option One: ST215/75R14
  • Group 24 - 580 CCA
  • 20 amp
  • System: 12 V
  • Feed: 140 ft/min | 1500 rpm
  • Actuation Force (BFSB): 34 lbs
  • System Type: Tandem Center
  • Pump Flow at Maximum RPM: 5 gpm
  • System relief: 2500 psi | Auto Reverse PSI: 2300 psi
  • Tongue Description: 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
  • 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
  • Pintle or ball | Option One: Rubber torsional | Option Two: Rubber torsional
  • Feed Roller Dimension: 15.8" dia (40 cm) | Infeed Throat Capacity: 9 in x 14 in (22.9 cm x 35.6 cm) | Pinch Point - Distance to End of Feed Table: 65 in | Distance from Feed Table to Ground: 29 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 9 in | Thickness: 1 in | Diameter: 33 in | Knife Thickness: .6 in | Knife Size: 5" x 11.75" (12.7 cm x 29.8 cm) | Bedknife Size: 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical | Bedknife Thickness: .8 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 140.4 in | Feed Roller Dimension: 13.5" (34.3 cm) | Table Down, Tongue Extended: 154.8 in | Infeed Table: 26 in
  • 79.5 in | Infeed Table: 48 in
  • 97 in | Infeed Hopper: 32 in | Chute: 96.7 in
  • Option One: 14" (35.6 cm)
  • 16 gal
  • Oil Volume with Filter: 2.9 qt
  • Feed Roller Clamp Load: 560 lbs
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Feed Roller Clamp Type: Spring/weight | Number of Feed Roller Motors: 1 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, stop and reverse | Safety Lock - Number of Positions: 6 | Useable Edges: 2 | Number of Paddles: 2 | Fixture Method: Bolt-on | Bedknife - Number of Useable Edges: 2 | Number of Bearings: 2 | Rotation Type: Manual dual handles with pin lock | Filtration Method: 10 micron return | Fender Description: Bolt-on | Cutter Drive - Type: Dual spherical roller | Controller: Vermeer ACS | Shutdown System: Engine
  • 6.8 gal
  • Option One: 3060 lbs | Tongue - Engine Option One: 320 lbs | Of Feed Roller: 210 lbs | With Shaft: 330 lbs
  • Recommended: 10W30 | Vermeer VMF Gold
  • A8 chipper steel | Bedknife: Grade 50
  • Chipper - Polyester Cord with wrap
  • 12 | 2 | Number of Bolts/Knife: 5