2024 Vermeer® Pedestrian Trenchers RTX130

Information

2024 Vermeer® Pedestrian Trenchers RTX130

Powered by a 13-hp (9.7-kW) Honda engine, this unit offers a 30-in (76.2-cm) digging depth and has the ability to maneuver in tight spaces at a 35-in (88.9-cm) width. The intuitive design of the industry-exclusive VZ steering allows ease of movement through difficult ground conditions. This machine also offers the option of tires or tracks to give operators the versatility to take on their jobsite challenges.

Features may include:

VZ steering system

Steers effortlessly with the VZ steering system that requires minimal effort to the handle bars.

Narrow footprint

Fits into narrow areas with a footprint that measures only 35-in (88.9-cm) wide.

Operator presence system

Promotes on-the-job safety with an operator presence system that disengages the trencher and ground drives if the operator leaves the controls, in addition to a trenching cleat that restricts backward motion.

Trenching depth control

Elimination of the tail wheel on the track unit provides trenching depth control in uneven ground conditions and convenience to move through tight spaces.

High-torque digging

The RTX130 is equipped with a 13-hp (9.7-kW) Honda engine for optimal power on your jobsite.

Slender profile

A 35-in (88.9-cm) width allows the RTX130 to access small spaces — including passing through typical backyard gates.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • Pedestrian Trenchers RTX130
  • GX390
  • Gasoline
  • Available
  • (Over Rubber Tracks): 35 in | (Over Rubber Tires): 35 in | Tread with Rubber Tires (Centerline to Centerline): 8.5 in
  • 46 in

Specifications

  • 2024
  • Vermeer®
  • Pedestrian Trenchers
  • RTX130
  • Walk-Behind
  • GX390
  • Honda
  • Gross: 13 hp | Horsepower at Maximum RPM (Gross): 13 hp
  • 23.7 cu-in
  • 1
  • Medium: Forced Air
  • Gasoline
  • Ground: Hydrostatic
  • Maximum Forward Transport Speed at Full Throttle: 3.1 mph | Maximum Reverse Transport Speed at Full Throttle: 1 mph
  • Ground Drive Pump gpm at Maximum Engine RPM: 5.4 gpm | Attachment Pump gpm at Maximum Engine RPM: 8 gpm
  • Attachment Pump Relief Pressure (Trencher/Forward): 2500 psi
  • Ground Drive Pump Relief Pressure Forward/Reverse: 2400 psi
  • Hydraulic Supply Filter Rating: 100 mesh strainer | Hydraulic Return Filter Rating: 3 micron
  • Maximum Operating Angle (Fore/Aft): 20 deg / Left/Right: 20 deg
  • (Tractor with Tires): 83 in
  • (Over Rubber Tracks): 35 in | (Over Rubber Tires): 35 in | Tread with Rubber Tires (Centerline to Centerline): 8.5 in
  • 46 in
  • From Centerline of Axles: 33.2 in
  • Tank: 1.6 gal
  • Tank: 10.8 gal | system: 11.3 gal
  • Engine: .3 gal
  • (Tractor with Tires): 880 lbs