2025 Vermeer® Stump Cutters SC292

Information

2025 Vermeer® Stump Cutters SC292

The self-propelled SC292 stump cutter, equipped with a 26.5-hp (19.8-kW) EFI Relhko engine, delivers full-sized power in a compact unit and starts easily with electronic fuel injection.

SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.

Without the dual wheels installed, the SC292 is only 35 in (89 cm) wide, allowing it to enter narrow backyard gates and access tight jobsites.

Move easily between stumps with the selectable 2-speed ground drive.

Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.

All of the belts are found on one side of the machine for convenient servicing and can be adjusted independently without affecting the other belts.

Protect your stump cutter investment with extended service coverage options.

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Reliability meets efficiency
  • Simplicity that enables productivity
  • Built for ease of maintenance

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Stump Cutters SC292
  • Kohler Command
  • Control Station Description: Fixed side locations
  • Gas
  • Available
  • 49.8 in
  • 52 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC292
  • Stump
  • Kohler Command
  • 2
  • Pro EFI
  • Spin on
  • 44.3 ft-lb
  • Medium: Air
  • Gross (Maximum): 26.5 hp
  • Dry-type safety element and restriction indicator
  • Max Fuel Consumption: 2.7 gph
  • Gas
  • Electric clutch with brake
  • Steerable Axle Type: Manual single wheel or dual hydraulic steering axle
  • Rigid/Fixed
  • 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
  • 400 CCA
  • 20 amp
  • System Voltage: 12 V | Shutdown System: Oil pressure shutdown
  • Cutterwheel: 1400 rpm | Low Speed Travel: 66 ft/min | High Speed Travel: 133 ft/min
  • 105.4
  • System relief: 2030 psi
  • Pump Flow at Maximum RPM: 3.7 gpm
  • System Type: Open-loop series system | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter
  • Control Station Description: Fixed side locations
  • Adapter for TLR25 trailer
  • Welded tube and plate steel
  • Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
  • Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.7 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
  • 52 in
  • 110 in
  • 49.8 in
  • Transport: 52 in
  • Transport (without duals): 35 in | with duals: 49.8 in
  • Tank: 6 gal
  • Tank: 4 gal
  • Volume with Filter: 2 qt
  • 1285 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pockets: 16 | Jackshaft Bearing Type: Sealed ball | Directional Control: Manual hydraulic valve | Controller: Vermeer ACS | Gauges: Hourmeter | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Axle: Rigid
  • V-Belt
  • Recommended: 10W30 Kohler | hydraulic Recommended: Vermeer HyPower 68
  • Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 Banded