2024 Vermeer® Stump Cutters SC362

Information

2024 Vermeer® Stump Cutters SC362

Vermeer has expanded its stump cutter lineup offering increased options for the customer. Equipped with a 35-hp (26.1 kW) Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides operators with ample power and maneuverability to take out medium-sized stumps with the productivity and reliability that the field demands. The Vermeer SC362 is a great addition to any tree care or rental equipment fleet and the right complement to any Vermeer brush chipper or mini skid steer.

Features may include:

35-hp Vanguard gasoline engine

A 35-hp (26.1 kW) Vanguard gasoline engine offers low vibration, low emissions and a limited three-year warranty.

Selectable two-speed ground drive

Move easily between stumps with the selectable two-speed ground drive.

Convenient belt servicing

All of the belts are found on one side of the machine for convenient belt servicing

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC362
  • Control Station Description: Fixed side location
  • Gasoline
  • Available
  • 49.8 in
  • 53 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC362
  • Stump
  • Briggs & Stratton Vanguard
  • Gross Horsepower (Maximum): 35 hp
  • 53 ft-lb
  • Dry-type safety element and restriction indicator
  • Spin-on
  • Medium: Air
  • Max Fuel Consumption: 3.2 gph
  • Gasoline
  • Electric clutch with brake
  • Steerable Axle Type: Hydraulic steering, oscillating axle
  • Rigid/Fixed (Rear)
  • 5.7" x 8" (14.5 x 20.3 cm) duals standard
  • 400 CCA
  • 20 amp
  • System Voltage: 12 V | Shutdown System: Engine low oil pressure
  • Cutterwheel: 1400 rpm | Low Travel: 66 ft/min | High Travel: 133 ft/min
  • 106
  • System Type: Open-loop series system | Flow Control: AutoSweep® (option) or 2 speed ground drive
  • Pump Flow at Maximum RPM: 3.7 gpm
  • System relief: 2030 psi
  • Control Station Description: Fixed side location
  • Warning: Operator presence status, clutch engage/disengagement status
  • Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.7 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
  • 110 in
  • 49.8 in
  • 53 in
  • Transport (without duals): 35 in | with duals: 49.8 in
  • Transport: 53 in
  • 6 gal
  • With Filter: 2 qt
  • Tank: 4 gal
  • 1320 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pocket: 16 | Jackshaft Bearing Type: Sealed ball | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Directional Control: Manual hydraulic value | Controller: Vermeer ACS | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Gauges: Hourmeter | Control Station Description: Fixed side location | Axle: Rigid
  • Recommended: 10W30 / hydraulic: Vermeer HyPower 68
  • V-Belt
  • Number of Primary Belts: 2 individual (matched pair) | Number of Secondary Belts: 6 Banded