TexStar Equipment Sales

  • 5446 N State Hwy 6
  • Waco, TX 76712
  • Call Us: (254) 313-9970
  • https://www.texstarequipment.com/
Print This Page

2025 Vermeer® Trommel Screens TR626

Information

2025 VermeerĀ® Trommel Screens TR626

Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.

Move material smoothly without bridging, thanks to a tall, wide throat opening.

Startup delay and alarm systems notify your whole crew when the machine is about to start.

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to help reduce material loss and reduced dust in windy condition.

Can be ordered with 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to help reduce dust and material loss in windy conditions.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

Features may include:

  • Load your machine with convenience and confidence
  • Complete control allows for increased efficiency when it matters most
  • Spend less time on maintenance and more time being productive
  • Fine conveyor
  • Overs conveyor

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Trommel Screens TR626
  • Model: 4045H
  • Available
  • Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Head/Tail Pulley Type: 38" (996.5 cm) | Head Pulley Type: 38" (996.5 cm) | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
  • Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5' (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)

Specifications

  • 2025
  • VermeerĀ®
  • Trommel Screens
  • TR626
  • General
  • Model: 4045H
  • 4
  • Tier 3
  • Spin-on
  • John Deere
  • Dual element oversized
  • Rating: 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
  • Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 38.4 cu-in | Conveyor Motor Displacement: 21.4 cu-in
  • Fuel Consumption: 3.5 gph (13.3 L/hr) under most operating conditions
  • Leaf spring
  • 235-75R 17.5H qty. 4
  • 950 cold cranking amps
  • System Voltage: 12 V, 120 amp alternator
  • Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min | Fines Belt: 405 ft/min | Fines Belt: 705 ft/min | Maximum Variable Overs Belt: 290 ft/min
  • 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
  • 4 independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 13.2' x 5.3' (4 m x 1.6 m) | Apron Conveyor Rollers: 4" (10.2 cm) diameter | Drum Diameter: 6 ft | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Head/Tail Pulley Type: Rubber-lagged, 12" (30.5 cm) diameter | Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Head Pulley Type: Rubber lagged, 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 2.4" (6.1 cm) shaft | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Fines Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) | Conveyor Belt Type: 150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm) | Fines Conveyor Frame: 2" x 8" (5.1 cm x 20.3 cm) structural steel building | Conveyor Belt Size: 48" (121.9 cm) wide with raised crescent | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Solid Return Idler Size: 4" x 8" diameter | Overs Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • 54.5 ft
  • 113 in
  • 13.5 ft
  • Belt: 36 in
  • Bottom: 48 in
  • Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft | Fines Conveyor: 30.5 ft | Overs Conveyor: 19 ft
  • Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Head/Tail Pulley Type: 38" (996.5 cm) | Head Pulley Type: 38" (996.5 cm) | Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
  • Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5' (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)
  • 6 cu yd
  • Tank: 100 gal
  • Tank: 200 gal
  • Radiator Fan: Pusher type | Apron Conveyor Rollers: qty. 14 | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Head/Tail Pulley Type: Rubber lagged, crowned | Idler Type: 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers
  • Oil Volume with Filter: 15.5 qt
  • Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
  • 65000 lbs | Hitch: 30000 lbs
  • Bristle: Polyethylene | Fines Conveyor Frame: structural steel tubing | Conveyor Belt Type: vulcanized | Head Pulley Type: Rubber lagged | Overs Conveyor Frame: structural steel tubing