Motor
Motor Type
Siemens
Motor Power
150 hp, 1800 rpm, 460 V, 3 phase
Displacement
Drum: 48.8 cu in (800 cu cm) displacement | Conveyor: 38.4 cu-in
Suspension
Suspension
Leaf spring
Wheels & Tires
Tires, Rear Specification
235-75R 17.5H qty. 4
Electric
Electrical
System Voltage: 460 V
Operational
Operating Speed
Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min | Fines Belt: 405 ft/min
Hydraulics
Hydraulic Pump
62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
Chassis
Frame Type
4 independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame | Fines Conveyor Frame: 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing
Dimensions
Transport Length
54.5 ft
Transport Width
113 in
Transport Height
13.5 ft
Hopper Width
Bottom: 48 in
Conveyer Width
Apron Conveyor Belt: 48 in | 36 in
Length
Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft
Width
Operation: 113 in | Apron Opening: 43 in | Drum Support Description: 4 in (10.2 cm) | Head/Tail Pulley Type: 38 in (99.65 cm) | Head Pulley Type: 38 in (99.65 cm) | Self-Cleaning Tail Pulley: 38 in (96.5 cm)
Dimensions
Hopper Opening: 13.2 ft x 5.3 ft (4 m x 1.6 m) | Apron Conveyor Rollers: 4 in (10.2 cm) diameter qty. 14 | Drum Diameter: 6 ft | Drum Support Description: 8 in (20.3 cm) diameter | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25-in (3.2-cm) sealed ball bearings | Head/Tail Pulley Type: Rubber-lagged, 12 in (30.5 cm ) diameter | Head Pulley Bearing: 2.4 in (6.1 cm) pillow block | Rubber Flashing: Adjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm) | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4 in (10.2 cm) diameter | Head Pulley Type: Rubber lagged, 12 in (30.5 cm) diameter | Rubber Flashing: Adjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm) | Self-Cleaning Tail Pulley: 10 in (25.4 cm) diameter, 2.4 in (6.1 cm) shaft | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 11, each 4 in (10.2 cm) diameter | Conveyor Belt Type: 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
Height
Operation: 15.9 ft | Apron Opening: 34 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 16.6 ft (5.1 m) with drum at 4 deg
Capacities
Hopper Capacity
6 cu yd
Hydraulic Capacity
Tank: 200 gal
Features
Chassis: 22500 lbs
Volume
Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
Weights
Weight
65000 lbs | Hitch: 30000 lbs
Features
Construction Material
Bristle: Polyethylene
Features
Drum Support Description: Four steel trunnion rollers | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers
