2025 Vermeer® Trommel Screens TR6400
- Year 2025
- Make Vermeer®
- Model Trommel Screens
- Engine Model: 3.6L
2025 Vermeer® Trommel Screens TR6400
Compatibility with smaller gauge wire increases the open screen area helping overall production of the machine, particularly in applications when processing wetter materials.
Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that require frequent screen changes.
A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
A single large access door provides engine service access.
Lift bars lift and agitate material for thorough screening.
Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.
Features may include:
- Tough and compact design
- Quick change tensioned screens
- Complete control for maximized productivity
Engine
Cylinder Liners
4
Engine Manufacturer
Deutz
Oil Filter
Spin-on
Engine
Model: 3.6L
Air Cleaner
Dual element
Emissions
Tier 4F (Stage IV)
Engine Power
Rating: 100 hp (74.5 kW)
Motor
Displacement
Drum: 35.5 cu in (581.7 cu cm) displacement | Conveyor: 14.2 cu-in
Fuel System
Fuel System
Fuel Consumption: 3 gph (11.4 L/h)
Suspension
Suspension
Leaf spring
Wheels & Tires
Tires, Rear Specification
445/50 R22.5
Battery
Battery
950 CCA
Electric
Electrical
System Voltage: 12 V, 120 amp alternator
Operational
Operating Speed
Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min
Hydraulics
Hydraulic Pump
77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)
Chassis
Frame Type
Four independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame / Engineered structural frame
Dimensions
Transport Length
40 ft
Transport Width
99 in
Transport Height
13.1 ft
Conveyer Width
Belt: 36 in
Hopper Width
Bottom: 37.5 in
Length
Operation: 54 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft
Width
Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in
Height
Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)
Dimensions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25 in (3.2 cm) sealed ball bearings/brush | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.75 in (4.4 cm) double roller | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 8 in diameter, 38 in wide, crowned wing pully | Head Pulley Takeup: 8 in | Drum Angle Adjustability: 0-5 deg | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)
Capacities
Fuel Capacity
Tank: 50 gal
Hydraulic Capacity
Tank: 80 gal | 6.5 cu yd
Oil capacity
Oil Volume with Filter: 10 qt
Volume
Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
Weights
Weight
37000 lbs | Hitch: 4200 lbs
Features
Construction Material
Bristle: Polyethylene
Features
Radiator Fan: Suction | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 od x 4 in wide (20.3 x 10.2 cm) | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Axle: Leaf spring
Oil Type
Recommended: Mobil 15W40