Current Vermeer® Recycling Horizontal Grinders

2025 Vermeer® Horizontal Grinders HG4000E

2025 Vermeer® Horizontal Grinders HG4000E

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Horizontal Grinders
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Horizontal Grinders HG4000E

2025 Vermeer® Horizontal Grinders HG4000E

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Horizontal Grinders
  • Trim Name HG4000E
  • Generic Type (Primary) Horizontal
  • Engine Manufacturer Hendrickson

2025 Vermeer® Horizontal Grinders HG4000E

Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.

A 60-in (152.4-cm) wide infeed table with flared sidewalls can accommodate a large volume of material.

The HG4000E has a 500-hp (373-kW) WEG® totally-enclosed, fan-cooling electric motor for the mill, a 50-hp (37.3-kW) motor for the hydraulic pump, and a 2-hp (1.5-kW) motor for hydraulic cooling.

For enhanced flexibility within a single machine, a dedicated chip drum, adjustable for product size ranging from .125 in - 1 in (.3 cm - 2.5 cm), is available.

Improve cutting performance using the patented Series II duplex drum system designed with reversible hammers and tips to help reduce daily maintenance and nearly double wear life.

Hinged, dual screens boost processing efficiency and offer flexibility in end product sizing.

The intelligent feed system monitors the machine's engine speed, and holds the engine at an optimal level. This allows you to spend more time feeding and less time adjusting settings.

Machine damage caused by metal contaminants entering the hammermill can be costly. The Vermeer Damage Defense system helps protect your machine by detecting certain metal contaminants.

An industry-leading, full-function, wireless remote control lets you adjust machine settings from the cab as conditions change, including control of the infeed settings, engine droop, conveyor height and more.

Reduce the quantity and distance of thrown material debris with the Thrown Object Deflector (TOD), strategically placed to reduce interference when loading over-length material.

Features may include:

  • Bring efficiency to your stationary grinding operation
  • Drum and screen options provide efficient processing and product sizing
  • A wide infeed design makes over-the-side loading easy and efficient
  • Reduce the quantity and distance of thrown debris

Engine

Engine Manufacturer Hendrickson

Motor

Motor Type Weg
Motor Power 2 hp

Drivetrain

Drive System Radial piston motor | Motor: Fixed displacement, Geroler | Planetary: 34.2:1 | Motor: Fixed displacement, Geroler

Suspension

Suspension Spring

Wheels & Tires

Tires, Rear Specification 425/65R22.5 super singles / 385/65R22.5 super singles
Wheels Aluminum

Battery

Battery AA (qty 6) | Channel Setting: 50 channels

Electric

Electrical 380V | Frequency: 50 | Phase: 3 | System Voltage: 380V or 460V | System Protection: Fused

Operational

Operating Speed Rated: 1430 rpm | Drum: 1125 rpm / 845 rpm | Belt: 529 ft/min
Operating Conditions Full Load Torque: 7.4 ft-lb | Screen Area: 3131 sq in

Performance

Noise Level 110.2 db(A) re1pW

Hydraulics

Hydraulic Type System: Open-loop, pressure- and flow-compensated | System: Open-loop
Pump Type Variable displacement, axial piston | Fixed displacement, gear pump
Hydraulic Flow Pump at Maximum RPM: 25.9 (60HZ) ; 24.9 (50HZ) | Pump at Maximum RPM: 14.7 gpm
Maximum Pressure System Relief: 3000

Chassis

Frame Type 90L
Hitch/Type Unit body construction

Dimensions

Dimensions Full Load Amps: 3.32 | Locked Rotor Amps: 20.9 | Service Factor: 1 | Locked Rotor (%): 180 | Power Factor: 0.83 | Infeed Roller Diameter: 28 in | Drum Diameter: 22.5 in | Tip Diameter: 31.3 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 4.3 in | Center Retention Pin Dimensions: 2" (5 cm) dia. | Drum Diameter: 22.5 in | Tip Diameter: 31.3 in | Screen Dimensions: 3/4" (1.9 cm) thick | Liner Dimensions: 1/2" (1.3 cm) | Idler Roller Diameter: 12 in | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
Transport Length Maximum: 31.1 ft
Length Maximum (Operation): 47.1 ft | Maximum - Folding Conveyor: 47.1 ft | Feed Table: 15 ft | Center Retention Pin Dimensions: 75.25" (191 cm) | Liner Dimensions: 61.6" (156.5 cm) | 71.3 ft
Transport Width Maximum - with Dolly: 8.4 ft
Transport Height Maximum Transport with Dolly: 11.9 in
Width Maximum: 100 in | Electrical: 119 in | Feed Table: 60 in | Infeed Roller: 58 in | Millbox Opening; 60" (152 cm) | Millbox Opening: 60" (152 cm) wide x 26" (66 cm) high | Liner Dimensions: 5" (12.7 cm) | 48 in
Height Maximum - Folding Conveyor: 143 ft | Electrical: 90 in | Loading: 6.5 ft | Maximum Feed: 26 in | Millbox Opening: 26" (66 cm) | Millbox Opening: 26" (66 cm) | Load: 14 ft
Depth, Maximum Electrical: 26 in | Feed Table: 21 in
Cutting Width Drum: 60.6 in

Capacities

Features Feed Table: 4.8 cu yd | per Axle: 20000 lbs
Hydraulic Capacity 60 gal

Weights

Weight 38900 lbs | Rear Pad: 25000 lbs | Front Pad: 13900 lbs | Approximate: 49 lbs | Electrical: 3020 lbs | Infeed Roller: 1000 lbs

Features

Features Enclosure: TEFC | Duty Cycle: S1 - Continuous | NEMA Design: N | Insulation: F | Break Down: 250 | Ambient Temperature: 40 c | Nominal Efficiency: IE2 | Added Items: Terminal Block, C-Face | Flare Construction: Integrated with frame | Tooth Design: Serrated bars | Number of Teeth: 10 bars | Deflector Position: Variable | Number of Hammers: 9 | Number of Tips: 18 | Screen Type: Fabricated out of abrasion-resistant steel | Number of Screens: 2 | Number of Sides: 1 | Anvil Type: Fabricated steel with replaceable wear surfaces | Return Roller Quantity: 3 | Filtration Method: Dual in-tank return filters (B5=200) | Number of Coolers: 1 | Motor Series: Char-Lyn 6000 Series, Geroler | Display Type: LCD | Switches: Sealed membrane | Number of Axles: 2
Belt Type Direct | Design: 3-ply - 330# with V-cleat
Conveyor Type Feed: Welded slat chain
Construction Material steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor Construction: Welded steel with replaceable UHMW wear plates | Type: Fabricated steel | Millbox Lid Liner Dimensions: Abrasion-resistant steel | Splice: R2-stainless steel
Bearing Hanger Type Double-row, spherical roller | Idler Roller Bearing: 1-15/16, 4-bolt flange
Oil Type Vermeer HyPower 68

Product Photography

Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.