Engine
Engine Manufacturer
Caterpillar
Engine
C27
Emissions
Tier 4F (Stage 4)
Cylinder Liners
12
Engine Power
950 hp
Engine Torque, Maximum
3212 ft-lb
Air Cleaner
Dry-type with primary and secondary elements and restriction indicator
Oil Filter
Full-flow, spin-on
Cooling
Medium: Liquid
Motor
Motor Type
Track Drive: Hydrostatic with planetary transmission
Fuel System
Fuel System
Max Consumption: 47.5 gph
Fuel Type
Ultra-low sulfer diesel (<15 ppm)
Drivetrain
Clutch
Hydraulic-operated wet clutch with PTO | Engagement: Push-button | System Type: Open-loop
Drive System
Motor: Fixed displacement, geroler | Planetary (Qty 2): 34.2:1
Suspension
Suspension
Air-ride
Brakes
Brake System Type
Radial piston motor | Air-actuated with spring-applied parking brake | Track: Spring-applied, hydraulic-release wet disc parking brake
Wheels & Tires
Tires, Rear Specification
445/50R22.5 LR L (super singles)
Wheels
Aluminum
Battery
Battery
Group 8-D, 1400 CCA (Qty 2) | Radio: AA (Qty 6)
Electric
Alternator
24 volt | System Protection: Fused
Operational
Operating Speed
Drum: 1200 rpm | Belt: 877 ft/min | tracks Maximum: 2.8 mph | tracks Maximum Creep - (Low): 1.4 mph
Operating Conditions
Screen Area: 3583 sq in
Performance
Noise Level
120 dB(A)
Hydraulics
Hydraulic Type
System: Open-loop, pressure- and flow-compensated | Fan System: Open-loop, pressure compensated
Pump Type
Variable displacement, axial piston | clutch: Fixed displacement, gear pump
Hydraulic Flow
Pump at Maximum RPM: 63.3 gpm | 32.3 gpm | 25.7 gpm | clutch: 8.9 gpm | tracks: 57.6 gpm
Maximum Pressure
System Relief: 4200 psi | 3000 psi | clutch: 260 psi | tracks: 5000 psi
Chassis
Hitch/Type
Fifth wheel
Lights and Safety
Lighting
Trailer Type: 12-24V LED
Dimensions
Dimensions
Air to Boil Temperature: 126 deg | Infeed Roller Diameter: 36.1 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 6 in | Center Retention Pin Dimensions: 2" dia x 79.35" L | Knife Thickness - 9 in: .625 in (1.6 cm) | Shaft diameter - 9 in: 6.5 in | Knife Thickness - 4.5 in: .625 in (1.6 cm) | Shaft diameter - 4.5 in: 6.5 in | Screen Dimensions: 1" thick | Liner Dimensions: .75, 1" (1.9 cm, 2.5 cm) thick | Anvil Type: Fabricated steel with replaceable wear surfaces | Anvil Dimensions: 6.6" x 18.2" x 81" (16.7 cm x 46.2 cm x 205.7 cm) | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
Transport Length
Maximum: 48.1 ft | with Dolly: 48.6 ft
Length
Maximum (Operation): 56.5 ft | Center Retention Pin Dimensions: 79.35" | 89.3 ft | Track on Ground: 142" (360.7 cm)
Transport Width
Maximum: 10 ft | with Dolly: 10 ft
Transport Height
Maximum: 12 ft | with Dolly: 12.8 in
Width
Feed Table: 60 in | Infeed Roller: 56.3 in | Feed opening: 56.4-in (143.3-cm) | Millbox Opening: 60" W x 38" H | 48 in
Height
Loading: 6 ft | Feed opening: 38-in (96.5-cm) | Maximum Feed: 50 in | Millbox Opening: 38" | Load: 16.3 ft
Cutting Width
Drum: 62.4 in
Depth, Maximum
of Cut Adjustable - 9 in: .125 in (.31 cm) to 1 in (2.5 cm) | of Cut Adjustable - 4.5 in: 1.125 in (2.86 cm) to 1.5 in (3.81 cm)
Ground Clearance
5.3 in
Capacities
Fuel Capacity
Tank: 350 gal
Oil capacity
Volume with Filter: 71.9 qt
Features
Coolant Capacity (Engine and Radiator): 45 gal | clutch Tank capacity: 21 gal | per Axle: 20000 lbs
Hydraulic Capacity
Tank: 100 gal
Weights
Weight
92000 lbs | Tongue - Engine Option 1 with Dolly: 45000 lbs | Axle Weight - Engine Option 1 with Dolly: 60000 lbs | Engine Option 1 with Dolly: 105000 lbs | Dolly: 9500 lbs | Infeed Roller: 2460 lbs | Infeed roller with arm: 4945 lbs | Drum: 5321 lbs | Drum - 9 in: 6707.5 lbs | Drum - 4.5 in: 6707.5 lbs | Screen: 470 lbs
Features
Features
Fan: (Qty 2) Variable-speed, reversible | Fan - CAC: Hydraulic (variable speed) | Tooth Design: Serrated bars | Number of Teeth: 12 | Deflector Position: Variable | Number of Hammers: 10 | Number of Tips: 20 | Tip option 1: 2-bolt | Tip types: Premium wide | Useable Edges - 9 in: 1 | Number of Pockets - 9 in: 14 | Shaft Retention Type - 9 in: Keyless bushing | Useable Edges - 4.5 in: 1 | Number of Pockets - 4.5 in: 14 | Shaft Retention Type - 4.5 in: Keyless bushing | Number of Screens: 2 | Return Roller Quantity: 6 | Filtration Method: Dual in-tank return filters with suction strainer | Number of Coolers: 1 | Fan Series - FWD/REV: Reversible | Filtration Method: Spin-on, pressure filter, B6 = 1000 | Number of Coolers: 1 | Display Type: LCD | Switches: Push-button | Switches: Sealed membrane | Number of Axles: 3 | Track Type: D5 double grouser | Type of Idler: D5 excavator rollers | Number of Idlers 20
Oil Type
Recommended: CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) | Recommended: Vermeer HyPower 68 | Recommended: Vermeer VMF Gold
Belt Type
Drive Type: V-belt | Design: 3 ply - 330# or straight warp single ply 330# both with V cleat
Construction Material
Flare: Integrated with infeed | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | 9 in:A8 mod chipper steel | 4.5 in: A8 mod chipper steel | Screen Type: Abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion-resistant steel | Splice: R2-stainless steel or super splice
Conveyance Type
Feed: Welded slat chain
Bearing Hanger Type
Double row, sperical roller
Knife Quantity
Number of - 9 in: 14 | Number of Bolts/Knife: 4 | Number of - 4.5 in: 14 | Number of Bolts/Knife: 2