2025 Vermeer® Pipeline Trenchers T1055III

Information

2025 Vermeer® Pipeline Trenchers T1055III

Perform rock excavation effectively with minimal chain wear due to its low-speed, high-torque, splined headshaft motor.

SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.

Complimentary to the sectionalized booms, the crumber can be adjusted to accommodate a variety of digging depths.

The elevating cab allows optimal visibility and added comfort with the air ride seat.

The sealed cab has self-contained heating and air conditioning with sound attenuating foam.

It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).

Features may include:

  • For trenching projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 trencher
  • When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Pipeline Trenchers T1055III
  • C13 ACERT
  • Available
  • Ranges: 116"-122" (294.6 cm - 309.9 cm) | belt: 30 in
  • Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)

Specifications

  • 2025
  • Vermeer®
  • Pipeline Trenchers
  • T1055III
  • Implement / Attachment
  • C13 ACERT
  • 6
  • Tier 3
  • Full Flow
  • 2100 rpm
  • Caterpillar
  • Gross: 415 hp
  • Medium: Liquid
  • Dry-type exhaust aspirated
  • Turbocharged and air-to-air aftercooled
  • Fuel Consumption at Full Load: 20.9 gph
  • Track Drive Type: Dual path hydrostatic with planetary transmission
  • Service: Hydrostatic
  • spring-applied, hydraulic release, wet disc brake
  • System: 24 Volt DC
  • Operating Range: 8.8 hours
  • Maximum Ground Speed - Low: 57.1 ft/min | Conveyor Belt Speed Range: 0-1070 fpm (0-326 m/min) | Maximum Ground Speed - High: 114 ft/min
  • Setting: 2500 psi
  • Minimum: 9.4 psi / Maximum: 13.9 psi
  • Pump Flow at Maximum RPM: 27.9 gpm
  • pressure-and-flow-compensated (load-sensing)
  • Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 5" and 65" (12.7 and 165.1 cm) | with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft
  • Pad Ranges: 24" (61 cm) or 30" (76.2 cm)
  • Ranges: 116"-122" (294.6 cm - 309.9 cm) | belt: 30 in
  • Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)
  • with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft | track: 176 in | conveyor: 108" or 168" (274.3 cm or 426.7 cm)
  • 184 gal
  • 152 gal
  • Range: 87,000 lb - 124,000 lb (39,463.5 kg - 56,245.5 kg)
  • Track Size: D7G | Control System: TEC Plus with SmartTEC
  • Direction: Right or left
  • Pad: Single or double grouser
  • Belt Style: Cleat or finger type | Style: Curved
  • Vermeer HyPower 68 or Vermeer HyPower 100