2025 Vermeer® Utility Directional Drills D10x15 S3

Information

2025 Vermeer® Utility Directional Drills D10x15 S3

A maximum ground drive speed (forward) of up to 3.3 mph (5.3 km/hr), jobsite entry and jobsite departure go more quickly.

Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.

An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.

Reduced noise levels at operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling efficient communication among the crew.

Features may include:

  • Reliable, economical solution for small service installation
  • Increase crew's productivity
  • Put more product in the ground in a short amount of time

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Utility Directional Drills D10x15 S3
  • TD2.9
  • Low sulfur diesel
  • Available

Specifications

  • 2025
  • Vermeer®
  • Utility Directional Drills
  • D10x15 S3
  • Directional
  • TD2.9
  • Deutz
  • Gross: 60 hp
  • Turbocharged
  • Maximum: 2300 rpm
  • Rating: Tier 4i (EU Stage IIIA)
  • Spindle (High at Maximum Engine RPM): 1500 ft-lb
  • Max Fuel Consumption: 2.5 gph
  • Low sulfur diesel
  • Thrust: 10000 lbs | Pullback: 10000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 208 ft/min | Maximum Spindle Speed at Max Engine RPM: 240 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.3 mph
  • At Operator's Ear: 86 dB(A) | Guaranteed sound power (CE-rating): 103 dB(A)
  • Hydraulic Supply Filter Rating: 5 micron | Hydraulic Return Filter Rating: 5 micron
  • Auxiliary Pump Flow at Maximum Engine RPM: 9 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 29 gpm | Rotation Pump Flow at Maximum Engine RPM: 29 gpm
  • Auxiliary Pump Relief Pressure: 3000 psi | Thrust/Pullback Pump Relief Pressure: 4350 psi | Rotation Pump Relief Pressure: 4350 psi | 750 psi
  • Angle of Approach: 22 deg | Maximum Operating Angle (Fore/Aft): 25 deg / Left/Right: 25 deg | Rod Diameter: 1.66 in (4.3 cm) | Joint Inside Diameter: .8 in | Minimum Bend Radius: 95.5 ft
  • Drill pipe: 6 ft
  • Minimum: 153 in
  • Minimum: 44 in
  • Minimum: 66 in
  • Minimum Diameter: 2.5 in
  • 18 gal
  • 25 gal
  • 7750 lbs | drill pipe: 26 lbs
  • Drill Rod Thread: 1.66 Firestick® drill rod #200 | Thread Type: Firestick (#200) | Brand: FMC