Current Vermeer® Renewable-Energy Utility Directional Drills

2025 Vermeer® Utility Directional Drills D24 HDD

2025 Vermeer® Utility Directional Drills D24 HDD

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Utility Directional Drills
  • Engine CAT C3.6
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Utility Directional Drills D24 HDD

2025 Vermeer® Utility Directional Drills D24 HDD

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Utility Directional Drills
  • Trim Name D24 HDD
  • Generic Type (Primary) Directional
  • Aspiration Turbo
  • Engine CAT C3.6
  • Displacement 220 cu-in
  • Engine Power Gross: 100 hp
  • Cooling Method: Liquid
  • Rated Engine Speed Maximum: 2000 rpm
  • Emissions Rating: T4F/SV
  • Engine Torque, Maximum Spindle (High at Maximum Engine RPM): 1200 ft-lb

2025 Vermeer® Utility Directional Drills D24 HDD

Taking a new standard, the D24 boasts enhanced hydraulics, electrical design and power train system designed for maximum reliability, all backed with an industry leading 3-year, 3,000-hour OEM extended warranty program.

Intelligent on-rig diagnostics to get ahead of the game with technology that helps deliver more uptime with specific diagnostic explanation and prescriptive troubleshooting steps right to the operator's fingertips.

Easy and automated rod exchange with a single button push completes the entire rod changeout sequence, eliminating up to 19 steps, giving operators from various skill levels more time for more rod in the ground.

Sliding, open-sided vise to minimize the number of steps to change out a rod with this patented vise design. The vise utilizes sliding, open-side functionality, which allows you to see the rod joint.

The drill is equipped with 100-hp (75-kW) CAT® 3.6L Stage V engine. Two 800 CCA batteries improve cold start capability.

Features may include:

  • Easier drilling for crews of various skill levels with an automated rod exchange and open-side vise.
  • Help increase uptime with on-rig diagnostics and bolstered reliability from redesigned components.

Engine

Aspiration Turbo
Engine CAT C3.6
Displacement 220 cu-in
Engine Power Gross: 100 hp
Cooling Method: Liquid
Rated Engine Speed Maximum: 2000 rpm
Emissions Rating: T4F/SV
Engine Torque, Maximum Spindle (High at Maximum Engine RPM): 1200 ft-lb

Fuel System

Fuel Type Ultra low sulfur diesel
Fuel System Max Fuel Consumption: 5 gph

Operational

Idle Speed 1000 rpm
Operating Conditions Thrust: 24700 lbs | Pullback: 24700 lbs
Operating Speed Maximum Carriage Speed at Maximum Engine RPM: 181 ft/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 90 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 3080 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 2270 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 1460 ft-lb | Maximum Spindle Speed (Low at Maximum Engine RPM): 99 rpm | Maximum Spindle Speed (Medium at Maximum Engine RPM): 132 rpm | Maximum Spindle Speed at Max Engine RPM: 198 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.3 mph

Performance

Noise Level At Operator's Ear: 88 dB(A) | Guaranteed sound power (CE-rating): 100 dB(A)

Hydraulics

Hydraulic Pump Auxiliary Pump Flow at Maximum Engine RPM: 8 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 27 gpm | Rotation Pump Flow at Maximum Engine RPM: 27 gpm
Maximum Pressure 900 psi | Auxiliary Pump Relief Pressure: 2750 psi | Thrust/Pullback Pump Relief Pressure: 5000 psi | Rotation Pump Relief Pressure: 5000 psi | 750 psi

Dimensions

Length Drill pipe: 10 ft
Transport Height Minimum: 89 in
Transport Length Minimum: 224 in
Transport Width Minimum: 56 in
Bore Minimum Diameter: 4 in
Dimensions Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 35 deg | Maximum Operating Angle (Left/Right): 35 deg | Rod Diameter: 2.375 in (6.03 cm) | Joint Inside Diameter: .9 in | Joint Outside Diameter: 2.625 in (6.67 cm) | Minimum Bend Radius: 108 ft | Hydraulic Supply Filter Rating: B1000 = 6 micron | Hydraulic Return Filter Rating: B1000 = 11 micron

Capacities

Fuel Capacity 35 gal
Hydraulic Capacity 25 gal
Hydraulic Flow Maximum: 45 gpm
Features On Board Tank Capacity: 5 gal | Rodbox: 400 ft

Weights

Weight 16380 lbs | Drill pipe: 75 lbs | Max peak thrust: 24700 lbs | Continuous thrust: 22000 lbs | Max peak pullback: 24700 lbs | Continuous pullback: 22000 lbs

Features

Features Brand: FMC | Drill Rod Thread: #600 | Thread Type: | Breakout System: Sliding, open side

Product Photography

Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.