2025 Vermeer® Utility Directional Drills D24 HDD

Information

2025 Vermeer® Utility Directional Drills D24 HDD

Taking a new standard, the D24 boasts enhanced hydraulics, electrical design and power train system designed for maximum reliability, all backed with an industry leading 3-year, 3,000-hour OEM extended warranty program.

Intelligent on-rig diagnostics to get ahead of the game with technology that helps deliver more uptime with specific diagnostic explanation and prescriptive troubleshooting steps right to the operator's fingertips.

Easy and automated rod exchange with a single button push completes the entire rod changeout sequence, eliminating up to 19 steps, giving operators from various skill levels more time for more rod in the ground.

Sliding, open-sided vise to minimize the number of steps to change out a rod with this patented vise design. The vise utilizes sliding, open-side functionality, which allows you to see the rod joint.

The drill is equipped with 100-hp (75-kW) CAT® 3.6L Stage V engine. Two 800 CCA batteries improve cold start capability.

Features may include:

  • Easier drilling for crews of various skill levels with an automated rod exchange and open-side vise.
  • Help increase uptime with on-rig diagnostics and bolstered reliability from redesigned components.

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Utility Directional Drills D24 HDD
  • CAT C3.6
  • Ultra low sulfur diesel
  • Available

Specifications

  • 2025
  • Vermeer®
  • Utility Directional Drills
  • D24 HDD
  • Directional
  • CAT C3.6
  • Turbo
  • 220 cu-in
  • Gross: 100 hp
  • Method: Liquid
  • Maximum: 2000 rpm
  • Rating: T4F/SV
  • Spindle (High at Maximum Engine RPM): 1200 ft-lb
  • Max Fuel Consumption: 5 gph
  • Ultra low sulfur diesel
  • 1000 rpm
  • Thrust: 24700 lbs | Pullback: 24700 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 181 ft/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 90 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 3080 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 2270 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 1460 ft-lb | Maximum Spindle Speed (Low at Maximum Engine RPM): 99 rpm | Maximum Spindle Speed (Medium at Maximum Engine RPM): 132 rpm | Maximum Spindle Speed at Max Engine RPM: 198 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.3 mph
  • At Operator's Ear: 88 dB(A) | Guaranteed sound power (CE-rating): 100 dB(A)
  • Auxiliary Pump Flow at Maximum Engine RPM: 8 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 27 gpm | Rotation Pump Flow at Maximum Engine RPM: 27 gpm
  • 900 psi | Auxiliary Pump Relief Pressure: 2750 psi | Thrust/Pullback Pump Relief Pressure: 5000 psi | Rotation Pump Relief Pressure: 5000 psi | 750 psi
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 35 deg | Maximum Operating Angle (Left/Right): 35 deg | Rod Diameter: 2.375 in (6.03 cm) | Joint Inside Diameter: .9 in | Joint Outside Diameter: 2.625 in (6.67 cm) | Minimum Bend Radius: 108 ft | Hydraulic Supply Filter Rating: B1000 = 6 micron | Hydraulic Return Filter Rating: B1000 = 11 micron
  • Drill pipe: 10 ft
  • Minimum: 89 in
  • Minimum: 224 in
  • Minimum: 56 in
  • Minimum Diameter: 4 in
  • 35 gal
  • 25 gal
  • Maximum: 45 gpm
  • Brand: FMC | Drill Rod Thread: #600 | Thread Type: | Breakout System: Sliding, open side
  • 16380 lbs | Drill pipe: 75 lbs | Max peak thrust: 24700 lbs | Continuous thrust: 22000 lbs | Max peak pullback: 24700 lbs | Continuous pullback: 22000 lbs