2025 Vermeer® Utility Directional Drills D60x90 S3 HDD

Information

2025 Vermeer® Utility Directional Drills D60x90 S3 HDD

Up to 60,000 lb (226.9 kN) of thrust and pullback and 9,250 ft-lb (12,202.4 Nm) of rotational torque helps you get the job done faster.

Guaranteed sound power rating of just 107 dB(A) – 12 dB(A) lower than its predecessor the D60x90 – resulting in reduced noise at operator’s ear [83 dB(A)], increased operator comfort and minimized noise disturbance in residential or urban areas.

Interactive, full-color DigiTrak® Aurora® touchscreen display allows operators to load the bore plan via flash drive and view it on screen — eliminating hard copy plans.

Large open-top vise design allows passage of larger tooling for ease of tool removal and installation.

Popular and proven rod loader design provides reliable performance.

Features may include:

  • Significantly more powerful and quieter than its predecessor
  • Packs valuable benefits in a modest footprint
  • Maximizes machine and jobsite productivity

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Utility Directional Drills D60x90 S3 HDD
  • Ultra Low Sulfur Diesel
  • Available
  • With cab: 104 in

Specifications

  • 2025
  • Vermeer®
  • Utility Directional Drills
  • D60x90 S3 HDD
  • Directional
  • Cat
  • Maximum: 2200 rpm
  • Gross: 202 hp
  • Turbo Charged
  • Maximum Spindle Torque (Low at Maximum Engine RPM): 9250 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 6810 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 3790 ft-lb
  • Ultra Low Sulfur Diesel
  • Thrust: 60000 lbs | Pullback: 60000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 55 ft/min | Maximum Spindle Speed at Max Engine RPM: 200 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.7 mph
  • At Operator's Ear: 83 dB(A)
  • Auxiliary Pump Flow at Maximum Engine RPM: 13.4 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 41 gpm | Rotation Pump Flow at Maximum Engine RPM: 55 gpm | maximum: 150 gpm
  • Auxiliary Pump Relief Pressure: 3000 psi | Thrust/Pullback Pump Relief Pressure: 5500 psi | Rotation Pump Relief Pressure: 5800 psi | 900 psi
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 30 continuous/45 intermittent | Maximum Operating Angle (Left/Right):: 30 continuous/45 intermittent | Drill Rack Angle: 15.6 deg | Joint Inside Diameter: .8 in | Minimum Bend Radius: Minimum Bend Radius 169 ft
  • Minimum: 354 in
  • Minimum: 90 in
  • Minimum: 104 in
  • With cab: 104 in
  • Minimum Diameter: 6 in
  • 90 gal
  • Tank: 75 gal | System: 100 gal
  • 42150 lbs
  • Breakout System: Open top Vise | Brand: Kerr