2024 Vermeer® BC1200XL 1200XL

Information

2024 Vermeer® BC1200XL 1200XL

The electronic fuel injection engine provides improved fuel economy with 115 horsepower (85.8 kW). This allows for more efficient working conditions and boosts engine response under load.

See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Features may include:

Dual horizontal offset feed rollers

Get more done thanks to the aggressive feeding action of dual horizontal offset feed rollers.

SmartFeed system

Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.

Clutchless PTO system

Prevent premature wear to the belt drive system using the clutchless PTO system, which prevents high-speed engagement of the cutter drum.

Electronic fuel injection engine

With improved fuel economy, the 115-hp (85.8-kW) Origin gas engine allows for more efficient working conditions and boosts engine response under load.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC1200XL 1200XL
  • Model: Origin 4.3 | Option One: Dexter axle
  • Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
  • Gasoline
  • Available
  • 79 in | Infeed Table: 52 in | Drum: 20 in
  • 103 in | Infeed Hopper: 32 in | Chute: 104 in

Specifications

  • 2024
  • Vermeer®
  • BC1200XL
  • 1200XL
  • Brush
  • Model: Origin 4.3 | Option One: Dexter axle
  • 6
  • Gross (Maximum): 115 hp
  • 231 ft-lb
  • 2-stage dry with safety valve
  • Spin-on
  • 2.4 in
  • Medium: Liquid
  • Cutter Drive: Linkbelt
  • Manufacturer: White Hydraulic
  • Max Fuel Consumption: 8.3 gph
  • Electronic
  • Gasoline
  • Torsion
  • Electric
  • Option One: ST235/80/R16 Load Range E | Option Two: ST285/75/R16 Load Range E
  • Group 31; 950 CCA
  • System Voltage: 12 volt | Switches: Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle | Controller: Vermeer ACS | Display: LCD | Shutdown System: High temperature, low pressure
  • 70 Amp
  • Feed: 110 ft/min | drum: 2000 rpm | Winch Input: 51 rpm
  • Actuation Force: 34 lbs | Rope Line Pull: 2000 lbs
  • 124 dB(a)
  • System Type: Open center, dual pumps
  • Flow at Maximum RPM: 4.5 gpm
  • System relief: 2500 psi | Auto Reverse: 2500 psi | Winch Relief System: 2200 psi
  • 2000 cfm
  • Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
  • 7" (17.78) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • Lock - Number of Positions: 2 | Trailerype: LED
  • Feed Roller Minimum Distance to Drum: 1 in | Feed Roller Dimension: 15 | Feed Roller Dimension (Two): 11.1" (28.3 cm) | Infeed Throat Capacity: 13.3" x 17" (33.7 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 67.4 in | Distance from Feed Table to Ground: 27.2 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 13.3 in | Thickness: .4 in | drum: 20 in | Knife Thickness: .6 in | Knife Size: .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Boom Structure: .25" (6.4 mm) Grade 50 | Winch Rope: 7/16' (1.11 cm)
  • Feed Table Up, Tongue In: 168 in | Table Down, Tongue Extended: 206 in | Infeed Table: 30.1 in | Rope: 150 ft
  • 79 in | Infeed Table: 52 in | Drum: 20 in
  • 103 in | Infeed Hopper: 32 in | Chute: 104 in
  • 19" sucker
  • Option Two: 16" (40.6)
  • Volume with Filter: 4.5 qt
  • Coolant Capacity (Engine and Radiator): 4 gal
  • Feed Roller Clamp Load: 2650 lbs
  • Tank: 12 gal
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic cylinder | Number of Feed Roller Motors: 2 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, and reverse | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Manual pivot with handle | Filtration Method: 10 micron return, 100 micron suction | Cutter Drive: Type Spherical roller | Type - Option One: Rubber torsional | Winch Controls: Forward, reverse and free spool | Rope Choker: Detachable chain choker
  • Weight - Option One: 5680 lbs | Tongue - Option One: 660 lbs | of Feed Roller (Option Two): 80 lbs | Of Feed Roller: 150 lbs | With Shaft: 480 lbs
  • Recommended: SAE 10W30 | hydraulic Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife Material: 1018
  • 8 / 2: 12 | Number of Knives: 2 | Number of Bolts/Knife: 4
  • 5V