2025 Vermeer® Pedestrian Trenchers RTX250

Information

2025 Vermeer® Pedestrian Trenchers RTX250

The RTX250 features a 25-hp (18.6-kW) electronic fuel-injected (EFI) engine that starts reliably in a wide variety of temperatures and altitudes.

Rubber tracks offer outstanding traction in soft, rocky or muddy conditions with minimal ground disturbance.

The VZ steering system eliminates the need for additional levers, helping to reduce operator training time.

Even when facing varied terrain and unfavorable ground conditions, the RTX250’s high-mount track design offers outstanding traction and minimizes ground disturbance.

Engine offers excellent startability in a wide variety of temperatures and altitudes, while issues normally associated with conventional carbureted engines — such as flooding — are eliminated.

The slender profile, with a 35 in (88.9 cm) width, allows the unit to move through narrow yard gates.

Promotes on-the-job safety with an operator presence system that disengages the trencher and ground drives if the operator leaves the controls, in addition to a trenching cleat that restricts backward motion.

Features may include:

  • Versatile configuration
  • Enhanced mobility for improved efficiency
  • High-powered engine for more productivity

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Pedestrian Trenchers RTX250
  • PRO ECH740
  • Gas
  • Available
  • 34.5 in
  • 48 in

Specifications

  • 2025
  • Vermeer®
  • Pedestrian Trenchers
  • RTX250
  • Implement / Attachment
  • PRO ECH740
  • 2
  • Natural
  • 45 cu-in
  • Kohler Command
  • Medium: Forced Air
  • Gross: 25 hp | at Maximum RPM (Gross): 25 hp
  • Gas
  • Ground: Hydrostatic
  • Maximum Forward Transport Speed at Full Throttle: 3.5 mph | Maximum Reverse Transport Speed at Full Throttle: 2.5 mph
  • Attachment Pump Relief Pressure (Trencher/Forward): 2975 psi
  • Ground Drive Pump Relief Pressure Forward/Reverse: 2900 psi
  • Ground Drive Pump gpm at Maximum Engine RPM: 11.4 gpm | Attachment Pump gpm at Maximum Engine RPM: 16.1 gpm
  • Hydraulic Supply Filter Rating: 10 micron nominal | Hydraulic Return Filter Rating: 10 micron nominal
  • Maximum Operating Angle (Fore/Aft): 25 deg | Maximum Operating Angle Left/Right: 25 deg
  • 79 in
  • 34.5 in
  • 48 in
  • Tank: 6.8 gal
  • Engine: .5 gal
  • Tank: 8 gal | system: 8.5 gal
  • 1550 lbs