2024 Vermeer® BC2100XL Base
- Year 2024
- Make Vermeer®
- Model BC2100XL
- Engine QSB
2024 Vermeer® BC2100XL Base
2024 Vermeer® BC2100XL
With a 21-in (53.3-cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large-diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.
Features may include:
SmartFeed systemImprove productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.
3-year/3000-hour extended limited warrantyProtect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drums, shaft and ring-feeder hubs.
Engine
Engine Manufacturer
Cummins | Dodge | Option One: Dexter
Engine
QSB
Displacement
6.7 L
Emissions
Tier 4 Final
Cylinder Liners
6
Engine Power
Gross (Maximum): 275 hp
Engine Torque, Maximum
730 ft-lb
Air Cleaner
DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
3.4 in
Motor
Displacement
4.9 CID
Motor Type
Manufacturer: Eaton
Fuel System
Fuel System
Max Fuel Consumption: 14 gph
Fuel Type
Ultra-low sulfur diesel
Drivetrain
Clutch
Drive Engagement: Clutchless PTO
Suspension
Suspension
Tandem torsion 8000 lb (3628.7 kg) capacity
Wheels & Tires
Tires, Rear Specification
Option One: 17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
Wheels
Capacity - Option One: 235/75R17.5 load range J
Brakes
Brake System Type
Electric
Battery
Battery
2 - 950 CCA
Electric
Electrical
Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | System Voltage: 12 volts | Shutdown System: Coolant temperature, intake manifold temperature, oil pressure
Alternator
130 amp Delco-Remy 245I
Operational
Operating Speed
Feed: 100 ft/min | drum: 1084 rpm
Hydraulics
Hydraulic Type
System Type: Open center
Hydraulic Pump
Pump Flow at Maximum RPM: 13 gpm
Maximum Pressure
System relief: 2750 psi | Auto Reverse: 2550 psi
Airflow
3600 cfm
Chassis
Chassis
Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) / Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on
Frame Type
2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
Hitch/Type
3 " (7.6 cm) pintle
Lights and Safety
Safety Features
Trailer Type: LED | Safety Lock - Number of Positions: 4
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 10 in | Feed Roller Dimension: 19 " (48.3 cm) | Infeed Throat Capacity: 40 in x 24 in | Distance from Feed Table to Ground: 30.8 in | Infeed Table Material Thickness: .4 in | Material Capacity: 21 in | Thickness: 28 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 5 " x 14 " (12.7 cm x 35.6 cm) | Bedknife Size: 3 " x 27.5 " (7.6 cm x 69.9 cm) | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Cutter Drive: Type Spherical roller
Length
Feed Table Up, Tongue In: 235 in | Table Down, Tongue Extended: 259 in | Infeed Table: 60.5 in
Width
95.8 in | Infeed Table: 72 in | drum: .5 in
Height
116.5 in | Infeed Hopper: 38.5 in | Chute: 116 in
Fan Diameter
26" (66 cm) suction
Capacities
Fuel Capacity
65 gal
Oil capacity
Oil Volume with Filter: 17.6 qt
Cooling System
Coolant Capacity (Engine and Radiator): 8.8 gal
Load Capacity, Land
Feed Roller Clamp Load: 3500 lbs
Features
Dynamic: 65500 lbs
Hydraulic Capacity
24 gal
Weights
Weight
Option One: 16200 lbs | Tongue - Engine Option One: 2950 lbs | Of Feed Roller: 972 lbs | With Shaft: 1500 lbs
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green-hold-to-run button | Positions: 4: E-stop, Forward, Neutral, and Reverse | Useable Edges: 2 | Number of Paddles: 4 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Hydraulic | Filtration Method: 10 micron return, 100 mesh suction | Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | Controller: C148 | Radio Remote Control: Engine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop. | Toolbox Description: Lockable
Oil Type
Recommended: API CJ-4 | hydraulic: Recommended: Vermeer Hy-Power 68
Construction Material
A8 chipper steel
Knife Quantity
4 | Number of Bolts/Knife: 6
Belt Type
Belt Idler/Tensioner: Torsion arm spring-loaded | 5V chipper poly type
Base