2024 Vermeer® Stump Cutters SC292

Information

2024 Vermeer® Stump Cutters SC292

The self-propelled SC292 stump cutter is equipped with a 26.5 hp (19.8 kW) EFI Kohler engine providing full-sized power in a compact unit. Convenience and safety features include a hydraulic ground drive system, exclusive Vermeer Yellow Jacket™ Cutter System and operator presence handle system design that disengages the cutter wheel if the operator lets go of the controls. The Vermeer SC292 is a great addition to any tree care and rental equipment fleet, a perfect complement to any Vermeer brush chipper or mini skid steer

Features may include:

Easier start-up

Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine.

Selectable two-speed ground drive

Move easily between stumps with the selectable two-speed ground drive.

Convenient belt servicing

All of the belts are found on one side of the machine for convenient belt servicing.

Extended warranty

Protect your stump cutter investment with a 2-year/2000 hour or 3-year/3000 hour extended warranty

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC292
  • Kohler Command
  • Control Station Description: Fixed side locations
  • Gas
  • Available
  • 49.8 in
  • 52 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC292
  • Stump
  • Kohler Command
  • Pro EFI
  • 2
  • Gross (Maximum): 26.5 hp
  • 44.3 ft-lb
  • Dry-type safety element and restriction indicator
  • Spin on
  • Medium: Air
  • Max Fuel Consumption: 2.7 gph
  • Gas
  • Electric clutch with brake
  • Steerable Axle Type: Manual single wheel or dual hydraulic steering axle
  • Rigid/Fixed
  • 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
  • 400 CCA
  • 20 amp
  • System Voltage: 12 V | Shutdown System: Oil pressure shutdown
  • Cutterwheel: 1400 rpm | Low Speed Travel: 66 ft/min | High Speed Travel: 133 ft/min
  • 105.4
  • System Type: Open-loop series system | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter
  • Pump Flow at Maximum RPM: 3.7 gpm
  • System relief: 2030 psi
  • Control Station Description: Fixed side locations
  • Welded tube and plate steel
  • Adapter for TLR25 trailer
  • Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
  • Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.7 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
  • 110 in
  • 49.8 in
  • 52 in
  • Transport (without duals): 35 in | with duals: 49.8 in
  • Transport: 52 in
  • Tank: 6 gal
  • Volume with Filter: 2 qt
  • Tank: 4 gal
  • 1285 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pockets: 16 | Jackshaft Bearing Type: Sealed ball | Directional Control: Manual hydraulic valve | Controller: Vermeer ACS | Gauges: Hourmeter | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Axle: Rigid
  • Recommended: 10W30 Kohler | hydraulic Recommended: Vermeer HyPower 68
  • V-Belt
  • Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 Banded