Engine
Engine Manufacturer
Briggs & Stratton Vanguard
Engine Power
Gross Horsepower (Maximum): 35 hp
Engine Torque, Maximum
53 ft-lb
Air Cleaner
Dry-type safety element and restriction indicator
Oil Filter
Spin-on
Cooling
Medium: Air
Fuel System
Fuel System
Max Fuel Consumption: 3.2 gph
Fuel Type
Gasoline
Drivetrain
Clutch
Electric clutch with brake
Steering
Steerable Axle Type: Hydraulic steering, oscillating axle
Suspension
Suspension
Rigid/Fixed (Rear)
Wheels & Tires
Tires, Rear Specification
5.7" x 8" (14.5 x 20.3 cm) duals standard
Battery
Battery
400 CCA
Electric
Alternator
20 amp
Electrical
System Voltage: 12 V | Shutdown System: Engine low oil pressure
Operational
Operating Speed
Cutterwheel: 1400 rpm | Low Travel: 66 ft/min | High Travel: 133 ft/min
Performance
Noise Level
106
Hydraulic Type
System Type: Open-loop series system | Flow Control: AutoSweep® (option) or 2 speed ground drive
Hydraulic Pump
Pump Flow at Maximum RPM: 3.7 gpm
Maximum Pressure
System relief: 2030 psi
Chassis
Chassis
Control Station Description: Fixed side location
Lights and Safety
Lighting
Warning: Operator presence status, clutch engage/disengagement status
Dimensions
Dimensions
Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.7 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
Hydraulics
Length
110 in
Width
49.8 in
Height
53 in
Overall Width
Transport (without duals): 35 in | with duals: 49.8 in
Overall Height
Transport: 53 in
Capacities
Fuel Capacity
6 gal
Oil capacity
With Filter: 2 qt
Hydraulic Capacity
Tank: 4 gal
Weights
Weight
1320 lbs
Features
Features
Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pocket: 16 | Jackshaft Bearing Type: Sealed ball | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Directional Control: Manual hydraulic value | Controller: Vermeer ACS | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Gauges: Hourmeter | Control Station Description: Fixed side location | Axle: Rigid
Oil Type
Recommended: 10W30 / hydraulic: Vermeer HyPower 68
Belt Type
V-Belt
Belt Quantity
Number of Primary Belts: 2 individual (matched pair) | Number of Secondary Belts: 6 Banded
