Engine
Engine Manufacturer
CAT
Displacement
C1.7
Emissions
T4F/Stage V
Cylinder Liners
3
Engine Power
Gross Horsepower (Maximum): 48 hp
Engine Torque, Maximum
Torque (Max): 123 ft-lb
Air Cleaner
Dry-type, restriction indicator, evacuator valve and safety element
Oil Filter
Spin-on
Cooling
Medium Water/antifreeze
Fuel System
Fuel System
Max Fuel Consumption: 2.9 gph
Fuel Type
Ultra-low sulfur diesel
Drivetrain
Clutch
Type Electric clutch with brake
Gearbox
Lower: Straight bevel
Drive Shaft
2 universal joints | U Joints: 2 standard with double lip seal
Brakes
Brake System Type
Spring-applied and hydraulically-released dual parking brakes
Battery
Battery
950 CCA
Electric
Electrical
System Voltage: 12
Operational
Operating Speed
Cutterwheel: 1235 rpm | High Travel: 1.5 mph | Low Travel: 1.1 mph | Low Travel: 100 ft/min | High Travel: 140 ft/min
Performance
Noise Level
107 dB(A)
Hydraulics
Hydraulic Type
Filtration Method: Full-flow 4-micron return filter, suction strainer
Hydraulic Pump
Flow at Maximum: 11 gpm
Maximum Pressure
System relief: 2900 psi | System Relief: 2900 psi | Ground Bearing Pressure - Soft Ground: 5.7 psi
Pump Type
Track Drive: Tandem gear pump, pressure balanced
Lights and Safety
Lighting
Warning: Engine warning
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 35 deg | Fan: 16.5 in | Cutterwheel Diameter: 24 in | Cutterwheel Thickness 1.4 in | Cutterwheel Straight Line Dimension: 65 in | Cutterwheel Cut Above Ground: 28 in | Cutterwheel Cut Below Ground: 16 in | Chip Containment 23 cu ft | Blade Travel Above Ground: 8.5 in | Remote Range: 300 ft (91.4 m)
Length
140 in
Width
(tracks retracted): 35 in | (tracks extended): 49 in | Chip blade (without extensions): 34 in
Height
(non-remote unit): 76 in | (remote unit): 85 in
Track Length
on Ground: 47 in (119.4 cm)
Capacities
Oil capacity
Volume with Filter 5.3 qt | Lower Gearbox: 1.6 qt
Features
(Engine and Radiator): 2.9 gal
Hydraulic Capacity
9 gal
Weights
Weight
Engine Option One: 3750 lbs
Features
Features
Number of Teeth: 27 | Number of wear plates: 6 | Reversible Pockets/Teeth: 24 | System Type: Tandem gear pump, pressure balanced | Switches: Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade | Controller: Danfoss | Display: Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status | Shutdown System: High engine temperature and low oil pressure | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate | Type: of Idler Cast | Number of Idlers: 7 | emote Display LCD with remote control and machine functions status
Oil Type
Recommended: Oil 10W-30 | Type - Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer highpower 68
Construction Material
Frame Description: Welded tube and plate steel
Track Type
Rubber 7-in width
