2024 Vermeer® Stump Cutters SC552

Information

2024 Vermeer® Stump Cutters SC552

The Vermeer SC552 stump cutter is designed to maneuver through tough jobsite conditions. A unique four-bar linkage allows the cutter wheel to move away from the machine as the boom drops down toward the stump, reducing the need to reposition the entire unit. This machine can achieve cutting heights of 31 in (78.7 cm) above ground and 25 in (63.5 cm) below grade. Chips can be easily moved on the jobsite with the standard 34 in (86.4 cm) wide front-mounted chip blade.

Features may include:

Compact footprint

Get into tight spots with side-mounted controls that are easy to reach, and an auxiliary control station that lets the operator lead or follow the machine through narrow confines.

Easy maintenance access

Reduce maintenance time through features like hinged doors and removable panels that give you easy access to service pumps.

Confidence Plus® asset protection program

Add Confidence Plus® asset protection program in your initial purchase or add it anytime within the standard one-year warranty period. When you finance your maintenance expenses, you can know and plan for a fixed cost upfront. Check with your local Vermeer dealer for specific model availability.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC552
  • KDI 1903
  • Diesel
  • Available
  • 35 in
  • 76.5 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC552
  • Stump
  • KDI 1903
  • Kohler
  • 3
  • Gross (Maximum): 56 hp
  • 165 ft-lb
  • Medium: Liquid
  • Dry type safety element and restriction indicator
  • Cartridge Style
  • Max Fuel Consumption: 2.4 gph
  • Diesel
  • Hydrostatic Transmission
  • Lower: 90 degree
  • Steerable Axle Type: Two wheels, hydraulic
  • Steerable axle type
  • Spring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop)
  • Duals, 23x8.5-14
  • 14" x 6" (35.56 cm x 15.24 cm)
  • 950 CCA
  • 100 amp
  • System Voltage: 12 Volt
  • Cutterwheel: 1124 rpm
  • System Type: 2 closed loops and 1 open
  • Welded tube and plate steel
  • Warning: Low oil pressure, high engine temperature, alternator/charging, wait to start glow plug indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controller
  • Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter without Teeth: 23 in | Cutterwheel Thickness: 1.1 in | Cutterwheel Straight Line Dimension: 72 in | Cutterwheel Cut Above Ground: 31 in | Cutterwheel Cut Below Ground: 25 in | Chip Containment: 28.2 cu ft | Degree of Oscillation: 15 deg | Chip Blade Dimension: 34 inches wide, 13.75 inches tall | Blade Travel Above Ground: 14 in | Bumper: .75" (1.9 cm) plate | Remote Range: 300'
  • 147 in
  • 35 in
  • 76.5 in
  • 105 deg
  • Tank: 14.5 gal
  • Volume with Filter: 9.4 qt | lower Gearbox: 1.6 qt
  • Coolant Capacity (Engine and Radiator): 1.7 gal
  • Tank: 17 gal
  • 4000 lbs
  • Fan: Suction | Number of Teeth: 26 | Number of Indexes: 2 per tooth | Number of Pockets: 26 | Filtration Method: Suction strainers, one charge pump filter and one 3 micron return filter | Directional Control: Electric over hydraulic | Deluxe Gauges: DP05 Display - Fuel,Hour Meter, Selectible | Switches: Two-speed ground drive, blade, steering, differential propel lock, SmartSweep settings, cutterwheel engage/disengage, creep, propel system joystick and boom controls joystick | Controller: Vermeer ACS | Remote Functions: Engine stop, throttle, cutter wheel engage, swing, raise/lower, propel, creep, smartsweep | Remote Display: LED | Sensor Type: Capacitive Handles | Quantity/Location: 2 - Swing Out Station | Visual Interface: Indicator Light/Display | Shutdown System: High coolant temperature, low oil pressure and high hydraulic oil temperature | Radio Remote Control Functions include: propel forward/reverse; boom up/down, boom left/right, steering left/right, blade up/down, SmartSweep settings, travel speed high/low, differential lock, throttle
  • Recommended: SAE 10W30 Low SAPS - ACEA E6-E9 | Lower Gearbox: Syn 75W90 | hydraulic Recommended: Vermeer HyPower 68
  • Operator Vision Shield Description: Abrasion resistant coated polycarbonate, 3/16" thick