2024 Vermeer® Stump Cutters SC70TX

2024 Vermeer® Stump Cutters SC70TX

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Stump Cutters
  • Engine CAT C2.2
2024 Vermeer® Stump Cutters SC70TX

2024 Vermeer® Stump Cutters SC70TX

2024 Vermeer® Stump Cutters SC70TX

The SC70TX can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator presence system and wheel brake to help you feel confident on the job.

Features may include:

Operator presence system

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

Ground drive speed

The ground drive speed helps transport the machine between stumps to increase productivity on the job.

SmartSweep™ control system

The SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.

Gearbox drive cutter wheel system

Gearbox drive cutter wheel system directs the maximum amount of horsepower to the cutter wheel for optimal jobsite productivity.

Engine

Engine CAT C2.2
Aspiration Turbocharged
Emissions Tier 4 final/Stage V
Engine Power Gross (Maximum): 67 hp
Engine Torque, Maximum 153 ft-lb
Air Cleaner Dry-type, restriction indicator, evacuator valve, safety element
Oil Filter Spin-on
Cooling Medium: Water/Antifreeze

Motor

Motor Type Track Drive: Integral motor and planetary unit

Fuel System

Fuel Type Ultra-low sulfur diesel
Fuel System Max Fuel Consumption: 3.8 gph

Drivetrain

Clutch Electric clutch with brake
Gearbox Upper: Straight bevel | Lower: Straight bevel
Drive Shaft 2 universal joints | U Joints: Two standard with double lip seal

Brakes

Brake System Type Spring-applied and hydraulically released dual parking brakes | Track: Integrated into motor/planetary unit

Battery

Battery 950 CCA

Electric

Alternator 85A
Electrical System Voltage: 12 | Shutdown System: High engine temperature and low oil pressure

Operational

Operating Speed Cutterwheel: 948 rpm | High Speed Travel: 1.6 mph | Low Speed Travel: .7 mph

Hydraulics

Hydraulic Type System Type: Tandem gear pump, pressure balanced | Filtration Method: Full-flow 4 micron return filter, suction strainer
Hydraulic Pump Flow at Maximum RPM: 9 gpm
Maximum Pressure System relief pressure: 3000 psi | 2900 psi (200 bar)
Ground Pressure Bearing - Soft Ground: 4.3 psi

Chassis

Chassis Control Station Description: Swing-out | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
Frame Type Track Frame Description: Tube and plate

Lights and Safety

Lighting Warning: Engine faults

Dimensions

Dimensions Cutterwheel Diameter without Teeth: 23 in | Cutterwheel Thickness: Cutterwheel Thickness 1.1 in | Cutterwheel Straight Line Dimension: 65 in | Cutterwheel Cut Above Ground: 27 in | Cutterwheel Cut Below Ground: 16 in | Chip Containment: 23 cu ft
Length 141.6 in
Width 51 in
Height 72 in
Fan Diameter 16.5 in (40.7 cm)
Track Width Retracted: 35 in | Extended: 51 in
Track Length On Ground: 51.2 in

Capacities

Fuel Capacity Tank: 12 gal
Oil capacity Volume with Filter: 8.5 qt | 1.7 qt | Lower Gearbox: 2.2 qt
Cooling System Coolant Capacity (Engine and Radiator): 2.9 gal
Hydraulic Capacity Tank: 9.6 gal

Weights

Weight Engine Option One: 3900 lbs

Features

Features Number of Teeth: 30 | Number of Indexes: 2 | Number of Pockets: 30 | Reversible Pockets: 30 | Controller: Vermeer C248 with SmartSweep | Display: Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status | Number of Idlers: 10 | Sensor Type: Capacitive | Quantity/Location: 2 | Remote Display: LCD with remote control and machine functions status
Oil Type Recommended: 10W-30 | SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended hydraulic: Vermeer Hypower 68
Track Type 9-in (22.9-cm) rubber iron core

Product Photography