2024 Vermeer® Stump Cutters SC802
- Year 2024
- Make Vermeer®
- Model Stump Cutters
- Engine TD2.9L
2024 Vermeer® Stump Cutters SC802
2024 Vermeer® Stump Cutters SC802
Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.
Features may include:
Rear deck containment areaCollect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.
Remote-controlled cutter operationKeep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.
Extended limited warrantyProtect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.
Engine
Engine Manufacturer
Deutz | Option One: Dexter
Engine
TD2.9L
Emissions
Tier 4 Final
Cylinder Liners
4
Engine Power
Gross (Maximum): 74 hp
Engine Torque, Maximum
188 ft-lb
Air Cleaner
Dry-type with precleaner, restriction indicator, evacuator valve and safety element
Oil Filter
Spin-on
Cooling
Medium: Air-cooled head, oil-cooled block
Fuel System
Fuel System
Max Fuel Consumption: 4.6 gph
Fuel Type
Diesel
Drivetrain
Clutch
Electric clutch with brake
Gearbox
Upper: Straight bevel | Lower: Straight bevel
Drive Shaft
Rubber dampened with 2 universal joints | U Joints: Two standard with double lip seal
Suspension
Suspension
Rubber torsional axle
Brakes
Brake System Type
Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
Wheels & Tires
Tires, Rear Specification
10x16.5LT Tubeless, bias ply, load ranged D
Wheels
ST235/80/R16 load range G | 16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
Battery
Battery
950
Electric
Alternator
95 amp
Electrical
System Voltage: 12 Volt | Shutdown System: Low oil pressure, high engine coolant temp
Operational
Operating Speed
Cutterwheel: Cutterwheel Speed 881 rpm
Performance
Noise Level
108.0 dB(a) / Option Two: 112.3 dB(a)
Hydraulics
Hydraulic Pump
Pump Flow at Maximum RPM: 3.2 gpm
Hydraulic Type
System Type: Gear pump, pressure balanced
Maximum Pressure
System relief: 2000 psi
Chassis
Frame Type
Reinforced 4" (10.2 cm) square tubing
Hitch/Type
Pin, pintle, 2 1/6" (1.6 cm) ball
Lights and Safety
Lighting
Warning: Engine warning | Trailer Type: LED
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter without Teeth: 28 in | Cutterwheel Thickness: .9 in | Cutterwheel Straight Line Dimension: 96 in | Cutterwheel Cut Above Ground: 35 in | Cutterwheel Cut Below Ground: 25 in | Chip Containment: 68 cu ft | Tongue Extension: 60" (152.4 cm)
Length
Tongue In: 167.3 in | Extended: 234 in | 167.3 in
Width
79.8 in
Height
79 in
Capacities
Fuel Capacity
25 gal
Oil capacity
Volume with Filter: 10.6 qt | 1.7 qt | Lower Gearbox: 2.2 qt
Hydraulic Capacity
Tank: 6 gal
Weights
Weight
Option One: 4400 lbs | Option Two: 4040 lbs | Tongue Option One: 460 lbs | Option Two: 380 lbs
Features
Features
Number of Teeth: 42 | Number of Indexes: 2 | Number of Pockets: 42 | Filtration Method: 6 micron full flow return filter; suction strainer | Switches: Ignition, throttle and clutch | Controller: Operation with AutoSweep | Display: Multifunction Display (MFD) | Operator Vision Shield Description: Abrasion-resistant coated poly carbonate | Gauges: MFD Multifunction LCD Display
Oil Type
Recommended: 15W40 Deutz | SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | hydraulic Recommended: Vermeer HyPower 68