2024 Vermeer® Stump Cutters SC802

Information

2024 Vermeer® Stump Cutters SC802

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

Features may include:

Rear deck containment area

Collect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.

Remote-controlled cutter operation

Keep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.

Extended limited warranty

Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC802
  • TD2.9L
  • Diesel
  • Available
  • 79.8 in
  • 79 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC802
  • Stump
  • TD2.9L
  • Deutz | Option One: Dexter
  • Tier 4 Final
  • 4
  • Gross (Maximum): 74 hp
  • 188 ft-lb
  • Dry-type with precleaner, restriction indicator, evacuator valve and safety element
  • Spin-on
  • Medium: Air-cooled head, oil-cooled block
  • Max Fuel Consumption: 4.6 gph
  • Diesel
  • Electric clutch with brake
  • Upper: Straight bevel | Lower: Straight bevel
  • Rubber dampened with 2 universal joints | U Joints: Two standard with double lip seal
  • Rubber torsional axle
  • Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
  • 10x16.5LT Tubeless, bias ply, load ranged D
  • ST235/80/R16 load range G | 16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
  • 950
  • 95 amp
  • System Voltage: 12 Volt | Shutdown System: Low oil pressure, high engine coolant temp
  • Cutterwheel: Cutterwheel Speed 881 rpm
  • 108.0 dB(a) / Option Two: 112.3 dB(a)
  • Pump Flow at Maximum RPM: 3.2 gpm
  • System Type: Gear pump, pressure balanced
  • System relief: 2000 psi
  • Reinforced 4" (10.2 cm) square tubing
  • Pin, pintle, 2 1/6" (1.6 cm) ball
  • Warning: Engine warning | Trailer Type: LED
  • Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter without Teeth: 28 in | Cutterwheel Thickness: .9 in | Cutterwheel Straight Line Dimension: 96 in | Cutterwheel Cut Above Ground: 35 in | Cutterwheel Cut Below Ground: 25 in | Chip Containment: 68 cu ft | Tongue Extension: 60" (152.4 cm)
  • Tongue In: 167.3 in | Extended: 234 in | 167.3 in
  • 79.8 in
  • 79 in
  • 25 gal
  • Volume with Filter: 10.6 qt | 1.7 qt | Lower Gearbox: 2.2 qt
  • Tank: 6 gal
  • Option One: 4400 lbs | Option Two: 4040 lbs | Tongue Option One: 460 lbs | Option Two: 380 lbs
  • Number of Teeth: 42 | Number of Indexes: 2 | Number of Pockets: 42 | Filtration Method: 6 micron full flow return filter; suction strainer | Switches: Ignition, throttle and clutch | Controller: Operation with AutoSweep | Display: Multifunction Display (MFD) | Operator Vision Shield Description: Abrasion-resistant coated poly carbonate | Gauges: MFD Multifunction LCD Display
  • Recommended: 15W40 Deutz | SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | hydraulic Recommended: Vermeer HyPower 68