2025 Vermeer® Whole Tree Chippers WC2300XL

Information

2025 Vermeer® Whole Tree Chippers WC2300XL

SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.

With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.

A CAT® C13 Tier 4 Final engine provides 440 hp (328 kW) of power to meet your jobsite demands. A Tier 3 engine option is available for less-regulated countries.

Two knife options allow the operator to select the knife that meets their end product sizing needs.

Built-in skid grab on the tongue allows it to be moved around onsite by a skidder or excavator.

A remote control allows operators to view engine parameters and change a variety of machine settings.

Features may include:

  • Enhanced durability allows you to spend less time on maintenance
  • Improved operator convenience
  • Engineered for efficient material handling

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2300XL
  • Available
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2300XL
  • General
  • Drive: WS-Series
  • Drive: 6.9 cu-in (113.1 cu-cm)
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Dual axle | Leaf spring
  • 22.5 x 14 aluminum
  • 385/65R22.5 Super Single
  • Group 8D 1155 CCA (Dual)
  • 24V
  • 1169
  • Feed Roller Speed: 98 ft/min (29.9 m/min)
  • 119 db(A)
  • Open-center
  • 16 gpm (60.6 L/min)
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi (275.8 bar) | Auto Reverse PSI: 3800 psi (262 bar)
  • Pintle
  • 10" x 4" x .375" wall rectangular tubing
  • Material Capacity: 23 in | Thickness: .4 in | Diameter: 36 in | Knife Thickness: .6 in (1.6 cm) | Knife Size: 8.5 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in (3.8 cm) | Dimension of Pockets: 8.5 in (21.6 cm) | Bottom Thickness: .1 in (.3 cm) | Wear Plate Thickness: .2 in (.5 cm) | Top Thickness: .2 in (.5 cm) | Side Wall Thickness: .2 in (.5 cm) | Deflector Thickness: .2 in | Side Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg
  • Maximum: 29.8 ft
  • Maximum: 98 in
  • Maximum: 10.9 ft
  • Maximum (Operation): 29.8 ft
  • Maximum Feed: 27 in | Chute: 132 in
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Infeed: 28 in | Feed Roller Distance to Drum: 1 in
  • 42 gal
  • 18740
  • 32700 lbs | Tongue: 6750 lbs | With Shaft: 2200 lbs | Infeed Roller: 575 lbs
  • Safety Lock - Number of Positions: 8 | Number of Knives: 8 | Useable Edges: One | Number of Bolts/Knife: 4 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 8 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: 14 | Rotational Lock: 22 | Flow Control: Two-feed roller and infeed conveyor | Switches Toggle: On/Off | Controller: ASM - C248 WC2300 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab
  • Hy-Power 68
  • Number of Infeed: 1
  • Dual independent chain
  • .38" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender Description: Jeep style (steel)