2025 Vermeer® Whole Tree Chippers WC2500TX

Information

2025 Vermeer® Whole Tree Chippers WC2500TX

A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.

With the variable-speed, dual-infeed conveyor chains operators can concentrate on loading the machine, not pushing the material through.

With the variable-speed, dual-infeed conveyor chains operators can concentrate on loading the machine, not pushing the material through.

Efficiently move the machine around jobsites without the need for additional support equipment. The track undercarriage offers 29 in (73.7 cm) of belly clearance and rising chain rollers for material cleanout.

The ACS monitors the machine's health.

Features may include:

  • Enhanced maneuverability wherever the job may take you
  • Productivity and versatility to complete the job
  • User-friendly operation for confidence on the job

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2500TX
  • Available
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in | Chute 2: 194.5 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2500TX
  • General
  • Drive: WS-Series
  • Drive: 6.9 cu-in (113.1 cu-cm)
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Dual axle | Leaf spring
  • Group 8D 1400 CCA (dual)
  • 24V
  • 1169 rpm
  • 8.4 psi
  • Feed Roller Speed: 98 ft/min
  • 122
  • Open-center
  • 16 gpm | Track: 38 gpm
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi | Auto Reverse PSI: 3750 psi | Track: 4786 psi
  • 8" x 4" x .375" wall rectangular tubing
  • Material Capacity: 25 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 8.5 to17 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in (3.8 cm) | Bottom Thickness: .1 in (.3 cm) | Wear Plate Thickness: .2 in (.5 cm) | Top Thickness: .2 in (.5 cm) | Side Wall Thickness: .2 in (.5 cm) | Deflector Thickness: .2 in (.5 cm) | Side Deflector Angle: 14 deg | Up Deflector Angle: 22 deg | Down Deflector Angle: 14 deg | Infeed Slope: 6 deg | Bottom Thickness 2: .1 in (.3 cm) | Wear Plate Thickness 2: .2 in (.5 cm) | Top Thickness 2: .2 in (.5 cm) | Side Wall Thickness 2: .2 in (.5 cm) | Deflector Thickness 2: .2 in (.5 cm) | Up Deflector Angle 2: 18 deg | Down Deflector Angle 2: 90 deg | Track Gauge: 97 in | Track Pitch: 132 in
  • Pad: 20 in
  • Maximum: 26.1 ft
  • Maximum: 11.6 ft
  • Maximum: 118 in
  • Maximum (Operation): 28.4 ft
  • Infeed: 28 in | Feed Roller Distance to Drum: 1 in
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in | Chute 2: 194.5 in
  • 33 gal | Track: 33 gal
  • With Shaft: 3163 lbs | Infeed Roller: 575 lbs
  • Safety Lock - Number of Positions: 2 to 4 | Useable Edges: 1 | Number of Bolts/Knife: 4 or 5 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 2 or 4 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: hydraulic | Rotational Lock:hydraulic | Flow Control: Two-feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Toolbox Description: Lockable
  • Number of Infeed: 2
  • Hy-Power 68, 46, or 32
  • Dual independent chain
  • .50" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar