Motor
Motor Type
Drive: WS-Series
Drivetrain
Displacement
Drive: 6.9 cu-in (113.1 cu-cm)
Driveline
Planetary: Auburn Model 9 | Manufacturer: White
Suspension
Suspension
Dual axle | Leaf spring
Wheels & Tires
Wheels
22.5 x 14 aluminum
Tires, Rear Specification
385/65R22.5 Super Single
Battery
Battery
Group 8D 1400 CCA (dual)
Electric
Electrical
24V
Operational
Operating Conditions
1169 rpm
Operating Speed
Feed Roller Speed: 98 ft/min (29.9 m/min)
Performance
Noise Level
121
Hydraulics
Hydraulic Type
Open-center
Hydraulic Flow
16 gpm (60.6 L/min)
Maximum Pressure
Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi (275.8 bar) | Auto Reverse PSI: 3750 psi (258.6 bar)
Chassis
Frame Type
10" x 4" x .375" wall rectangular tubing
Hitch/Type
Pintle
Dimensions
Transport Length
Maximum: 29.8 ft
Transport Height
Maximum: 10.9 ft
Transport Width
Maximum: 108 in
Length
Maximum (Operation): 29.8 ft
Height
Maximum Feed: 27 in | Chute: 132 in
Roller Diameter
Infeed: 28 in | Feed Roller Distance to Drum: 1 in
Width
34 in | Infeed Roller: 34 in | Feed Table: 98 in
Dimensions
Material Capacity: 25 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 17 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in | Bottom Thickness: .1 in | Wear Plate Thickness: .2 in | Top Thickness: .2 in | Side Wall Thickness: .2 in | Deflector Thickness: .2 in | Side Deflector Angle: 14 deg | Up Deflector Angle: 22 deg | Down Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg
Capacities
Tank Type
33 gal
Fuel Capacity
18740
Weights
Weight
38000 lbs | Tongue: 7500 lbs | With Shaft: 3163 lbs | Infeed Roller: 575 lbs
Features
Chain Type
Number of Infeed: 2
Oil Type
Hy-Power 68, 46, or 32
Conveyor Type
Dual independent chain
Features
Safety Lock - Number of Positions: 4 | Useable Edges: 1 | Number of Bolts/Knife: 5 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 4 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: hydraulic | Rotational Lock:hydraulic | Flow Control: Two-feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab
Construction Material
.50" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender Description: Jeep style (steel)
