2025 Vermeer® Whole Tree Chippers WC2500XL

Information

2025 Vermeer® Whole Tree Chippers WC2500XL

SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.

A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.

With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.

Self-adjusting hydraulic dry clutch provides consistent engagement, helping to prolong clutch life, minimize maintenance cost and optimize operator efficiency.

Easy knife change-out system to help reduce maintenance on the jobsite.

High-wear material flow areas of the machine — like the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to help extend machine life.

Features may include:

  • Expand your revenue stream with more flexibility
  • Designed with the operator in mind
  • Focus more on productivity and less on maintenance

Photos

Highlights

  • Waco, Texas
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2500XL
  • Available
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2500XL
  • General
  • Drive: WS-Series
  • Drive: 6.9 cu-in (113.1 cu-cm)
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Dual axle | Leaf spring
  • 22.5 x 14 aluminum
  • 385/65R22.5 Super Single
  • Group 8D 1400 CCA (dual)
  • 24V
  • 1169 rpm
  • Feed Roller Speed: 98 ft/min (29.9 m/min)
  • 121
  • Open-center
  • 16 gpm (60.6 L/min)
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi (275.8 bar) | Auto Reverse PSI: 3750 psi (258.6 bar)
  • 10" x 4" x .375" wall rectangular tubing
  • Pintle
  • Material Capacity: 25 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 17 | Bedknife Size: 34" wide | Bedknife Thickness: 1.5 in | Bottom Thickness: .1 in | Wear Plate Thickness: .2 in | Top Thickness: .2 in | Side Wall Thickness: .2 in | Deflector Thickness: .2 in | Side Deflector Angle: 14 deg | Up Deflector Angle: 22 deg | Down Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg
  • Maximum: 29.8 ft
  • Maximum: 10.9 ft
  • Maximum: 108 in
  • Maximum (Operation): 29.8 ft
  • Maximum Feed: 27 in | Chute: 132 in
  • Infeed: 28 in | Feed Roller Distance to Drum: 1 in
  • 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • 33 gal
  • 18740
  • 38000 lbs | Tongue: 7500 lbs | With Shaft: 3163 lbs | Infeed Roller: 575 lbs
  • Safety Lock - Number of Positions: 4 | Useable Edges: 1 | Number of Bolts/Knife: 5 | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 4 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Number of Knives: 12 | Rotation Type: hydraulic | Rotational Lock:hydraulic | Flow Control: Two-feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab
  • Number of Infeed: 2
  • Hy-Power 68, 46, or 32
  • Dual independent chain
  • .50" thick | A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender Description: Jeep style (steel)