2024 Vermeer® BC1000XL 1000XL

Information

2024 Vermeer® BC1000XL 1000XL

Complete with a 72.4-hp (54-kW) Deutz 2.9 L4 gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ engine control system and patented SmartFeed technology and has a 12-in (30.5-cm) cutting capacity.

Features may include:

Electronic fuel injection (EFI) engine

An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines.

SmartFeed system

Increase operator productivity while reducing strain on vital engine parts with the help of the patented SmartFeed system. This feed-sensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger, hardwood material.

3-year/3000-hour extended limited warranty

Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drum, shaft and ring-fetter hubs in addition to the 1-year/1000-hour Vermeer equipment limited warranty.

Photos

Highlights

  • Waco, Texas
  • 2024
  • Vermeer®
  • BC1000XL 1000XL
  • Unleaded and E10 gasoline
  • Available
  • 66.5 in | Infeed Table: 52 in
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in

Specifications

  • 2024
  • Vermeer®
  • BC1000XL
  • 1000XL
  • Brush
  • Deutz | Cutter Drive: Linkbelt | Chassis Option One: Dexter | Chassis Option Two: Dexter
  • Motor: 28.3
  • 4
  • Gross Horsepower (Maximum) 72.4 hp
  • 154 ft-lb
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid cooled
  • 2.4 in
  • Manufacturer: White
  • Max Consumption: 4 gph
  • Unleaded and E10 gasoline
  • Type: Clutchless PTO | Drive Engagement: Belt tensioner
  • Torsion | Option Two: Torsion
  • Option One: ST235/80/R16 Load Range E | Option Two: ST235/80R16 Load Range E
  • Group 24; 580 CCA
  • 95 amps
  • System Voltage: 12 volt
  • Feed: 118 ft/min | Drum/Disc: 2220 rpm
  • Actuation Force (BFSB): 34 lbs | Actuation Force: 34 lbs
  • 119 dB(A)
  • 580 cfm
  • System: Open center
  • Flow at Maximum RPM: 3 gpm
  • System relief: 2500 psi
  • 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness
  • Pintle
  • Trailer Type: LED
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller Dimension: 20 " x 17 " (50.8 cm x 43.2 cm) | Infeed Throat Capacity: 12 " x 17.5 " (30.5 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity 12 deg | Material Capacity: 12 in | Thickness: 20 in | Drum/disc: Diameter 20 in | Drum/disc - Knife Thickness .6 in | Knife Size 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5 " x 17.3 " (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Bedknife Material: 1018 | Chute Rotation Angle: 270 deg | Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) | Tongue Extension Extendable: 24" (61 cm) at 12" (30.5 cm) increments
  • Feed Table Up, Tongue In: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
  • 66.5 in | Infeed Table: 52 in
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in
  • 18.75-in suction
  • Option One: 16 " x 6 " (40.6 cm x 15.2 cm)
  • Tank: 20 gal
  • Volume with Filter: 8 qt
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Knives: 2 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral, and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Number of Bearings: 2 | Cutter Drive: Spherical rollers | Rotation Type: Manual rotate with pin lock | Filtration Method 10 micron return; 100 micron suction | Gauges: Fuel and MFD | Switches: Droop, EcoIdle, and Sensitivity | Controller: Vermeer ACS | Shutdown System: High temp, low pressure | Chassis Type - Option One: Rubber torsional | Chassis Option Two: Rubber torsional
  • Feed Roller Clamp: 350 lbs
  • Tank: 7 gal
  • Option One: 4680 lbs | Tongue - Engine Option One: 520 lbs | of Feed Roller: 400 lbs | Drum/Disc With Shaft: 460 lbs
  • Recommended: 10W30 | Recommended: Vermeer VMF
  • Number of: 2 | Number of Bolts: 4
  • Drum/Disc: A8 chipper steel | Fender Description: Bolt-on steel
  • 5V